Cell Relay Archive[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index][Thread Index][Author Index][Subject Index] Re: Can I connect PBX with ATM?
In article: <16ea4c5w165w@ace.swb.de> carlos@ace.swb.de (Carlos Rolaca) writes: > > mike gawdun <atg1@texas.net> writes: > > > > > This is one of the biggest weaknesses of ATM today, no PBX interfaces. > > > > > > > Can I connect PBX or PABX in an ATM Backbone? > > > Well, YES there is a PBX interface for the GDC Apex Switches! > You may ask your local Distributor/GDC for more info. > The GDC card is just a circuit emulation card, but with a G703 line card connected to it you can connect a PBX. Using this card, I have connected two telephones across a two switch ATM network. The telephones were connected to the circuit emulation card using multiplexors, when the multiplexors were connected back to back, there was no delay in the voice, but across the network a very small delay was noticeable. BTW I have heard that ALCATEL are playing with an ATM ready PBX. Andy -- ____________________________________________________________________________ ____ / | / / ____ ____/ | Andrew Valentine /---/ / / / / / / | Internet: andy@gargoyle.demon.co.uk / / / / /___/ /___/ | / | ___/ | |
|