Cell Relay Archive

Cell Relay Retreat>List Archive>month:1995-Jun> msg00370



[Date Prev][Date Next][Thread Prev][Thread Next]  
  [Date Index][Thread Index][Author Index][Subject Index]

Re: Siemens SMDS switch and Kentrox SDSU

  • From: pak sae ( MS IFSM) <spak1@gl.umbc.edu>
  • Date: Thu, 29 Jun 1995 07:40:57 -0500, Thu, 29 Jun 1995 08:40:59 -0400 (EDT)
  • Distribution: world

> 
> I've been working over the past few days to get a 4Mb SMDS line > running between a Siemens SMDS switch (used by Bell Atlantic in 
> the DC area) and a Kentrox DSU connected to a Cisco 7010 HIP
> interface. 
> 
> We were able to get it running today after the following suggestion
> from BA. The switch is using a 32 bit CRC. It was suggested that
> the Kentrox DSU and the Cisco be changed to use a 16 bit CRC word
> while leaving the switch at using a 32 bit CRC. No real explanation 
> was provided so I was wondering if someone with much more insight 
> than I have could shed some light on this (if it indeed makes sense).
> 
> Thanks,
> Jeff
> 
Hey Jeff,

Try calling Jasbal Singh, at bell-atlantic.

He's considered the guru on frame relay.
and might know of some one who can give you further insight.

-Sae