Cell Relay Archive

["Kevin Fleming" <no@spamming.now>]

Patrick,
RAD (Israel) have the ARC-101.  It has the interfaces you need.
You can view it at http://www.rad.co.il/products/family/arc101/arc101.htm
and you can find local contact information there for your country/area.
I suspect that they may be cheaper than the ADC Kentrox equipment.  I have
used the ARC-101 (E3 to E1) successfully.
Hope this helps.
Kevin.

Brad Reese wrote in message <35B7BB92.733A03C0@alliancedatacom.com>...
>Hi Patrick,
>
>Yes!  Alliance Datacom
>
>http://www.alliancedatacom.com/adc-kentrox-access-concentrators-multiplexer
s.htm
>
>sells the ADC Kentrox AAC-2 and the AAC-3,
>
>http://www.alliancedatacom.com/adc-kentrox-aac-2-concentrator.htm
>
>http://www.alliancedatacom.com/kentrox-aac-3-multiservice-access-concentrat
or.htm
>
>they both will do the job.  If you want Alliance Datacom to
>configure one of  them for you, we will need a sketch of how
>the application is desired to connect and all the protocols involved.
>
>Your contacts are Steve Taggart, E-mail: tag@alliancedatacom.com
>or Dan Lind, E-mail: danl@alliancedatacom.com
>800-444-5851 Toll Free, 214-503-7400 Office
>214-503-8660 Fax.
>
>Best regards,
>
>Brad Reese
>The Frame Relay Resource Center
>http://www.alliancedatacom.com
>Dallas, Texas USA
>800-444-5851
>214-503-7400
>
>Patrick Foy wrote:
>
>> Is there a stand alone device that connects converts a DS-3 signal into
an
>> OC-3?  I am looking for a interum solution to place between an inline
DS-3
>> and a 3COM ATM switch with an OC-3 interface.
>
>
>