Cell Relay Archive[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index][Thread Index][Author Index][Subject Index] NHRP clarifications
I have a few questions about NHRP Server. I appreciate any clarifications . 1.My first question is regarding the "NHRP Error Indication". Let us consider the following scenario: NHC------>NHS1----->NHS2----->NHS3 For the above picture ,if NHC generates a packet, and during the process of forwarding the packet, if the authentication between NHS2 and NHS3 fails, an error indication is sent to the protocol address which generated the packet.For the above case this would mean that NHS3 sends "error indication" to NHC. (refer to section5.2.7 of RFC 2332) While I understand the need to inform the NHC about the failure, to forward its packets, how does NHS3 convey to NHS2 about such failures so that a remedial action can be taken? 2.This is regarding the 'NHRP authentication extension". According to the section 4.5.2.5 of the MPOA specs, "if an MPS/NHS discovers that the next hop for a NHRP packet is another MPS on a common ELAN,the NHRP message should be forwarded to the control ATM address of the MPS". In such a scenario, is there any need to include the "authentication extension" in the NHRP packet. If yes, do we need to configure the "authentication information" for the neighbouring MPS statically? How is it done in the present implementations of MPS/NHS? Regards Archana -- ________________________________________________________________________ ARCHANA NEHRU : Trillium Digital Systems, Inc E-mail: archie@trillium.com : Los Angeles, California Phone: +1 310 442 9222 ________________________________________________________________________ |
|