Cell Relay Archive

Cell Relay Retreat>List Archive>month:2001-Mar> msg00000



[Date Prev][Date Next][Thread Prev][Thread Next]  
  [Date Index][Thread Index][Author Index][Subject Index]

CR:Re: GDC switch help

  • From: Fidar Adjie Laksono <fidar@risti.telkom.co.id>
  • Date: Thu, 1 Mar 2001 10:00:47 +0700 (JVT)



Here's my case (I'm using NPX series) :
connect the serial cable to craft port/manager port. And set the VT 100
emulation with setting : 19200 baud, 8 data bits, parity none, 1 stop bit.
However if we're using hyperterminal sometimes, it requires switch to
reboot :-(. It's better using the s/w emulator TUNIX (included in CDROM
Switch Documentation).

Regards

On Wed, 28 Feb 2001, Afroz Lateef wrote:

> Anybody out there using GDC switch?
> I need some help in connecting to the craft port.
> Is the Manager port the craft port or is it the Auxiliary port?
> Also, what shoulf the COM settings be?
> 9600, No Parity, 1 stop bit, Xon/Xoff flow control? Or something
> different.
> 
> Any help is GREATLY Appreciated.
> 
> Sincerely
> 
> Afroz Lateef
> 
>