The MPLS-OPS Archive

Cell Relay Retreat>MPLS-OPS Archive>month:2001-Jun> msg00352



[Date Prev][Date Next][Thread Prev][Thread Next]  
  [Date Index][Thread Index][Author Index][Subject Index]

Re: configuring ATM's for CISCO 7505 !!!

  • From: "NetLabs" <dsandel@netlabs-sp.com>
  • Date: Wed, 27 Jun 2001 17:40:12 -0500
  • Cc: <krishnan@research.bell-labs.com>, "\"Robert Raszuk\"" <raszuk@cisco.com>, "\"Alexander Marhold\"" <alexander@marhold.at>, "\"MPLS Operations\"" <mpls-ops@mplsrc.com>
  • Resent-Date: Wed, 27 Jun 2001 20:01:36 -0400
  • To: "Burns Bart - baburn" <Bart.Burns@acxiom.com>

Sivaramakrishna ...

By the way ... if you happen to experience any cell loss with that
configuration, you may have a sync problem with
both clock ends being set to internal.

If so, keep one internal, the other "loop".

I have seen it work both ways ....

Regards ...

Dave Sandel
CTO
NetLabs Inc.
www.netlabs-sp.com
314-651-8676


----- Original Message -----
From: "Burns Bart - baburn" <Bart.Burns@acxiom.com>
To: "'Sivaramakrishna Iyer Krishnan'" <krishnan@research.bell-labs.com>;
"Robert Raszuk" <raszuk@cisco.com>; "Alexander Marhold"
<alexander@marhold.at>; "MPLS Operations" <mpls-ops@mplsrc.com>
Sent: Wednesday, June 27, 2001 4:05 PM
Subject: RE: configuring ATM's for CISCO 7505 !!!


> Here is an example from CCO.
>
>
http://www.cisco.com/univercd/cc/td/doc/product/core/cis7000/interpr/atm/121
> 4aip.htm#xtocid2420349
>
> First router:
>
> interface ATM3/0
> ip address 1.0.0.1 255.0.0.0
> no keepalive
> map-group atm-in
> atm clock internal
> atm rate-queue 2 34
> atm pvc 1 1 5 aal5snap
> !
> map-list atm-in
> ip 1.0.0.2 atm-vc 1 broadcast
>
>
> Second router:
>
> interface ATM3/0
> ip address 1.0.0.2 255.0.0.0
> no keepalive
> map-group atm-in
> atm clock internal
> atm rate-queue 2 34
> atm pvc 1 1 5 aal5snap
> !
> map-list atm-in
> ip 1.0.0.1 atm-vc 1 broadcast
>
>
> Bart Burns
> Acxiom Corporation
> Work (501) 342-4167
> bart.burns@acxiom.com
>
>
>
> -----Original Message-----
> From: Sivaramakrishna Iyer Krishnan
> [mailto:krishnan@research.bell-labs.com]
> Sent: Wednesday, June 27, 2001 3:24 PM
> To: Robert Raszuk; Alexander Marhold; MPLS Operations
> Subject: configuring ATM's for CISCO 7505 !!!
>
>
>
> Hi,
>
> Does anybody have a working configuration for connecting two ATM on
> CISCO 7505 connected to each other by point -to-point OC3 cable ????..
>
> topology :-
>
> R1 (atm) ----- (atm) R2
>
> thanks,
> krishnan.
>
> -------
> The MPLS-OPS Mailing List
> Subscribe/Unsubscribe:  http://www.mplsrc.com/mplsops.shtml
> Archive: http://www.mplsrc.com/mpls-ops_archive.shtml
>
> -------
> The MPLS-OPS Mailing List
> Subscribe/Unsubscribe:  http://www.mplsrc.com/mplsops.shtml
> Archive: http://www.mplsrc.com/mpls-ops_archive.shtml
>

-------
The MPLS-OPS Mailing List
Subscribe/Unsubscribe:  http://www.mplsrc.com/mplsops.shtml
Archive: http://www.mplsrc.com/mpls-ops_archive.shtml