The MPLS-OPS Archive

Cell Relay Retreat>MPLS-OPS Archive>month:2001-Jun> msg00362



[Date Prev][Date Next][Thread Prev][Thread Next]  
  [Date Index][Thread Index][Author Index][Subject Index]

Fw: Re: About Cisco 7513 NAT

  • From: Panos Kolyvas <panos@noc.uoa.gr>
  • Date: Thu, 28 Jun 2001 12:34:33 +0300
  • Cc: <mpls-ops@mplsrc.com>
  • Resent-Date: Thu, 28 Jun 2001 06:27:38 -0400
  • To: <hliu100@sina.com>




Hi,

 i just checked with CISCO software download site.

 I searched for 12.0 IOS releases. I found the rsp-jsv-mz.120-9.bin which
may be suitable for your case (12.0.9 is GD - General Deployment).  This is
an Enterprise edition and thus the NAT functionality should be present.  I
do
not recommend an IP ONLY or IP version because i am not sure if the NAT is
included.

Panos Kolyvas
 Network Operations Center
 National & Kapodistrian University of Athens
 Athens
 Greece
 tel. +30 1 7275610

>
> ----- Original Message -----
> From: "hansenliu" <hliu100@sina.com>
> To: "Panos Kolyvas" <panos@noc.uoa.gr>
> Sent: Thursday, June 28, 2001 12:00 AM
> Subject: Re: Re: About Cisco 7513 NAT
>
>
> > Hi,Panos Kolyvas
> >
> >  Which version is IP Plus version ?  Is it T version ?
> >
> >
> > Regards,
> >
> > HansenLiu
> >
> >
> > >You must use CISCO IOS Image which is IP Plus version.  The one that
you
> use
> > >is a S version which as a Service Provider version usually deos not
> support
> > >NAT.
> > >
> > >Panos Kolyvas
> > >Network Operations Center
> > >National & Kapodistrian University of Athens
> > >Athens
> > >Greece
> > >tel. +30 1 7275610
> > >
> > >
> > >----- Original Message -----
> > >From: "hansenliu" <hliu100@sina.com>
> > >To: <mpls-ops@mplsrc.com>
> > >Sent: Tuesday, June 26, 2001 7:00 AM
> > >Subject: About Cisco 7513 NAT
> > >
> > >
> > >> Hi,Everybody,
> > >>
> > >>  This is a question for NAT. We have a Cisco 7513 router,With two
RSP4+
> > >,three fasterethernet port adaptor, a MultiChannel Interface process.
> With
> > >the IOS 12.0(14)S2 . Why the 7513 doesn't support " ip nat  " Command.
> How
> > >can i do to support this command.
> > >>
> > >> Regards,
> > >>
> > >> hansenliu
> > >>             hliu100@sina.com
> > >>
> > >> -------
> > >> The MPLS-OPS Mailing List
> > >> Subscribe/Unsubscribe:  http://www.mplsrc.com/mplsops.shtml
> > >> Archive: http://www.mplsrc.com/mpls-ops_archive.shtml
> > >>
> > >>
> > >
> > >-------
> > >The MPLS-OPS Mailing List
> > >Subscribe/Unsubscribe:  http://www.mplsrc.com/mplsops.shtml
> > >Archive: http://www.mplsrc.com/mpls-ops_archive.shtml
> >
> >                     ÖÂ
> > Àñ£¡
> >
> >             hansenliu
> >             hliu100@sina.com
> >
> >
> >
>

-------
The MPLS-OPS Mailing List
Subscribe/Unsubscribe:  http://www.mplsrc.com/mplsops.shtml
Archive: http://www.mplsrc.com/mpls-ops_archive.shtml