The MPLS-OPS Archive

[T M <tm01tr@yahoo.com>]

Hello All,

I've problem which is about inter-area MPLS TE. IGP is
OSPF and we've 4 areas except area 0. TE tunnel can be
worked in each area. But it couldn't be worked
inter-area. We've Cisco 7500 and Cisco 7206VXR
routers. IOS versions are 12.0.18(ST). One of the
routers' configuration as below.

Do you have any comments?

Thanks,

!
mpls label protocol ldp
mpls traffic-eng tunnels
tag-switching tdp router-id Loopback1
!
!
interface Tunnel101
 ip unnumbered Loopback1
 no ip directed-broadcast
 no ip route-cache cef
 tunnel destination A.B.C.D
 tunnel mode mpls traffic-eng
 tunnel mpls traffic-eng priority 7 7
 tunnel mpls traffic-eng bandwidth  1024
 tunnel mpls traffic-eng path-option 1 explicit name
abc
!
!
ip explicit-path name abc enable
 next-address X.Y.Z.T
 next-address E.F.G.H 
!

Interface and ospf configurations are standard.

debug result of this router:

TE-PCALC: Tunnel101 Path Setup to A.B.C.D: FULL_PATH
Nov 21 14:04:43: TE-PCALC: bw 1024, min_bw 0, metric:
0
Nov 21 14:04:43: TE-PCALC: setup_pri 7, hold_pri 7
Nov 21 14:04:43: TE-PCALC: affinity_bits 0x0,
affinity_mask 0xFFFF
Nov 21 14:04:43: TE-PCALC_PATH: get_path:Dst ip addr
A.B.C.D not found!


T.M.

__________________________________________________
Do You Yahoo!?
Yahoo! GeoCities - quick and easy web site hosting, just $8.95/month.
http://geocities.yahoo.com/ps/info1

-------
The MPLS-OPS Mailing List
Subscribe/Unsubscribe:  http://www.mplsrc.com/mplsops.shtml
Archive: http://www.mplsrc.com/mpls-ops_archive.shtml