The MPLS-OPS Archive

Cell Relay Retreat>MPLS-OPS Archive>month:2001-Nov> msg00117



[Date Prev][Date Next][Thread Prev][Thread Next]  
  [Date Index][Thread Index][Author Index][Subject Index]

Re: Unidentified subject!

  • From: Robert Raszuk <raszuk@cisco.com>
  • Date: Wed, 21 Nov 2001 18:30:59 +0100
  • CC: mpls-ops@mplsrc.com
  • Organization: Signature: http://www.employees.org/~raszuk/sig/
  • Resent-Date: Wed, 21 Nov 2001 15:30:07 -0500
  • To: T M <tm01tr@yahoo.com>


Oh btw I forgot to add that officially that seems to be comming around
23ST IOS what will be around mid summer next calendar year.

R.

> Robert Raszuk wrote:
> 
> I don't think cisco supports multi-area TE yet with OSPF. We were just
> planning to start EFT with ISIS as a matter of fact. Can you point me to
> any url which shows inter-area TE supported in 120(18)ST - that way I
> can learn soemthing :) ? Oh by the we will be supporting it in phases.
> 
> Phase 1 will alow you to specify ABRs manually, phase 2 may relax this
> further.
> 
> Rgs,
> R.
> 
> > T M wrote:
> >
> > Hello All,
> >
> > I've problem which is about inter-area MPLS TE. IGP is
> > OSPF and we've 4 areas except area 0. TE tunnel can be
> > worked in each area. But it couldn't be worked
> > inter-area. We've Cisco 7500 and Cisco 7206VXR
> > routers. IOS versions are 12.0.18(ST). One of the
> > routers' configuration as below.
> >
> > Do you have any comments?
> >
> > Thanks,
> >
> > !
> > mpls label protocol ldp
> > mpls traffic-eng tunnels
> > tag-switching tdp router-id Loopback1
> > !
> > !
> > interface Tunnel101
> >  ip unnumbered Loopback1
> >  no ip directed-broadcast
> >  no ip route-cache cef
> >  tunnel destination A.B.C.D
> >  tunnel mode mpls traffic-eng
> >  tunnel mpls traffic-eng priority 7 7
> >  tunnel mpls traffic-eng bandwidth  1024
> >  tunnel mpls traffic-eng path-option 1 explicit name
> > abc
> > !
> > !
> > ip explicit-path name abc enable
> >  next-address X.Y.Z.T
> >  next-address E.F.G.H
> > !
> >
> > Interface and ospf configurations are standard.
> >
> > debug result of this router:
> >
> > TE-PCALC: Tunnel101 Path Setup to A.B.C.D: FULL_PATH
> > Nov 21 14:04:43: TE-PCALC: bw 1024, min_bw 0, metric:
> > 0
> > Nov 21 14:04:43: TE-PCALC: setup_pri 7, hold_pri 7
> > Nov 21 14:04:43: TE-PCALC: affinity_bits 0x0,
> > affinity_mask 0xFFFF
> > Nov 21 14:04:43: TE-PCALC_PATH: get_path:Dst ip addr
> > A.B.C.D not found!
> >
> > T.M.
> >
> > __________________________________________________
> > Do You Yahoo!?
> > Yahoo! GeoCities - quick and easy web site hosting, just $8.95/month.
> > http://geocities.yahoo.com/ps/info1
> >
> > -------
> > The MPLS-OPS Mailing List
> > Subscribe/Unsubscribe:  http://www.mplsrc.com/mplsops.shtml
> > Archive: http://www.mplsrc.com/mpls-ops_archive.shtml

-------
The MPLS-OPS Mailing List
Subscribe/Unsubscribe:  http://www.mplsrc.com/mplsops.shtml
Archive: http://www.mplsrc.com/mpls-ops_archive.shtml