The MPLS-OPS Archive

Cell Relay Retreat>MPLS-OPS Archive>month:2001-Nov> msg00162



[Date Prev][Date Next][Thread Prev][Thread Next]  
  [Date Index][Thread Index][Author Index][Subject Index]

Re: Fwd: FW: How to Differentiate Traffic ?

  • From: krishnak@sify.com
  • Date: Wed, 28 Nov 2001 22:22:00 +0600 (IST)
  • Cc: raszuk@cisco.com, mpls-ops@mplsrc.com
  • Resent-Date: Wed, 28 Nov 2001 15:36:14 -0500
  • To: ccasey@bigfoot.com, "Chris C.," <theguber@hotmail.com>

Hi Robert,

I agree with Chris in this case, with MPLS, what customer sees is a low end very simple CPE router. As a service provider, we too don't want much complexity and control on customer end routers. Also, there could be cases, where cusotmer end router does not support FR, or tunnel or what ever. (As far as I know, GRE tunnel on Cisco is not compatible with other vendor routers).

I wish there could be a way you can control the traffic on the physical interface of PE itself. Along with the command "ip vrf forwarding VPN1", some ACL, or route-map or some thing could have been provided. 

Regards,
KK

 "Chris C.," <theguber@hotmail.com>:

> Robert,
> 
> Let me clarify a little. This is for a service Providers network. Let me
> 
> make some comments below:
> 
> 
> 
> > >
> > > 1. You have a CPE that does not support this? Like a DSL Bridge as
> an
> > > example.
> >
> >I am surprise that you would connect DSL bridge directly into the PE.
> >Usually it goes to NAS then via some L2 encapsulation (for example
> l2tp)
> >to PEs.
> >
> 
> Chris>> Need cheap CPE devices. The above was just one example. DSL
> bridge 
> through a DSLAM using a Bridge Group at the PE with DHCP for IP
> Addressing 
> so that telecommuters for an enterprise can get the same IP address
> wherther 
> they are at work or at home or a SOHO office. IE: The DHCP server for
> that 
> particular user is the actual enterprises Server
> 
> > > 2. You do not have a CPE. EG: Ethernet port off a L2 LAN Switch in a
> MTU
> > > model.
> >
> >Well most ethernet switches support VLANs. That's all what you need.
> >Also linux supports both GRE and vlans so you can easily use this as
> >solution as well.
> 
> Chris>> Does not seem practical. Are you saying put a LINUX WS at each
> site? 
> That eliminates the cost advantage of using Ethernet then doesn't it??
> Also 
> in the VLAN scenario would that not mean the clients Internet traffic
> could 
> route back to the VPN path? (Note: If the client did nothing about it
> and 
> was outsourcing the service to us the SP)
> 
> 
> 
> _________________________________________________________________
> Get your FREE download of MSN Explorer at
> http://explorer.msn.com/intl.asp
> 
> -------
> The MPLS-OPS Mailing List
> Subscribe/Unsubscribe:  http://www.mplsrc.com/mplsops.shtml
> Archive: http://www.mplsrc.com/mpls-ops_archive.shtml
> 

-------------------------------------------------
This mail helped a tree grow. Know more at http://green.sify.com

Want to win a PC or Palm Tops or Digital Diaries or T-Shirts?
Click here http://promos.sify.com/niit/main.asp?mail

-------
The MPLS-OPS Mailing List
Subscribe/Unsubscribe:  http://www.mplsrc.com/mplsops.shtml
Archive: http://www.mplsrc.com/mpls-ops_archive.shtml