The MPLS-OPS Archive[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index][Thread Index][Author Index][Subject Index] RE: MPLS on Foundry and Riverstone
I believe that everyone that has talked about Juniper and martini thus far in this little thread has referred to them as a transit for tunnel LSPs, not as edge devices. > > Even over RSVP tunnels (running through a Juniper in this case).. > > > > net-iron-400#sh mpls rsvp ses de > > .chance > -----Original Message----- > From: Harish D V [mailto:hdv@peakxv.net] > Sent: Monday, October 29, 2001 11:06 AM > To: Chance Whaley; Duane.Wright@186k.co.uk; ktho@cabletv.com.hk > Cc: mpls-ops@mplsrc.com > Subject: Re: MPLS on Foundry and Riverstone > > > Hi guys, > > I have been watching this string and was surprised to see that Juniper > supports draft-martini. becoz, I have a confirmed info from > Juniper itself > saying they don't support martini now!. > > Regards, > > Harish D V > Peak XV Networks > San Ramon > CA - 94583 > > 925-242-7459 office > 925-381-9967 cell > > www.peakxv.net > > "Out of Clutter, find Simplicity. From Discord, find harmony. > In the middle > of difficulty, lies opportunity." > - Albert Einstein > > > > ----- Original Message ----- > From: "Chance Whaley" <chance@dreamscope.com> > To: <Duane.Wright@186k.co.uk>; <ktho@cabletv.com.hk> > Cc: <mpls-ops@mplsrc.com> > Sent: Saturday, October 27, 2001 8:32 AM > Subject: RE: MPLS on Foundry and Riverstone > > > > Hmmm.. Looks like they run martini to me. > > > > net-iron-400#sh mpls ldp session > > Peer LDP Ident: 45.221.0.40:0, Local LDP Ident: 45.221.0.37:1 > > Active: no, State: Operational > > TCP connection: 45.221.0.37:646--45.221.0.40:11046, > State: ESTABLISHED > > Addresses bound to peer LDP Ident: > > 45.221.0.40 > > 127.0.0.12 > > 45.220.254.44 > > 45.221.40.40 > > > > net-iron-400#sh mpls vll detail > > VLL FDRY_to_Cisco_7600 VC-ID 3740 > > State: UP > > Vll-peer: 45.221.0.40 End-point: > untagged e 1/4 > > Local label: 800000 Remote label: 45 > > Local group-id: 0 > > Tunnel LSP: FDRY_to_Cisco_7600 (tnl0) > > > > > > Even over RSVP tunnels (running through a Juniper in this case).. > > > > net-iron-400#sh mpls rsvp ses de > > > > Ingress RSVP: 1 session(s) > > To From State Style Labelin > Labelout LSPname > > 45.221.0.38 45.221.0.37 Up FF - 103125 > > Foundry_to_Laurel > > Time left in seconds (PATH refresh: 1 RESV refresh: 26) > > Tspec: peak 0 kbps rate 0 kbps size 0 bytes m 20 M 65535 > > PATH sentto: 45.221.37.10 (p3/1 ) > > RESV rcvfrom: 45.221.37.10 (p3/1 ) > > > > Egress RSVP: 1 session(s) > > To From State Style Labelin > Labelout LSPname > > 45.221.0.37 45.221.0.38 Up FF - - > > LaurelToFoundry37 > > Time left in seconds (PATH refresh: 22 RESV refresh: 15) > > Tspec: peak 0 kbps rate 0 kbps size 0 bytes m 20 M 4458 > > PATH rcvfrom: 45.221.37.10 (p3/1 ) > > > > > > net-iron-400#sh mpls vll de > > VLL Foundry_to_Laurel VC-ID 3738 > > State: UP > > Vll-peer: 45.221.0.38 End-point: > untagged e 1/3 > > Local label: 800025 Remote label: 103644 > > Local group-id: 0 > > Tunnel LSP: Foundry_to_Laurel (tnl0) > > > > > > > > > > > > > > > -----Original Message----- > > > From: Duane.Wright@186k.co.uk [mailto:Duane.Wright@186k.co.uk] > > > Sent: Wednesday, October 24, 2001 4:04 AM > > > To: ktho@cabletv.com.hk > > > Cc: mpls-ops@mplsrc.com > > > Subject: Re: MPLS on Foundry and Riverstone > > > > > > > > > > > > The Foundry NetIron at present doesn't run MPLS martini > > > draft or Kompella > > > but there is interop info available. > > > Riverstone has already implemented Martini draft and it has > > > been tested > > > with Juniper's & Cisco. > > > As regards the performance if the Riverstone it works well. > > > In addition there is another emerging standard the Lasserre > > > draft which is > > > worth watching. > > > Perhaps if your more specific in what your attempting to do I > > > could shed > > > more light on the matter. > > > > > > > > > Duane Wright > > > > > > > > > > > > > > > > > > > > > "Ho, Kin Tak" > > > > > > <ktho@cabletv To: > > > <mpls-ops@mplsrc.com> > > > .com.hk> cc: > > > > > > Fax to: > > > > > > 24/10/2001 Subject: MPLS on > > > Foundry and Riverstone > > > 05:49 > > > > > > Please > > > > > > respond to > > > > > > ktho > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Does anyone have experience of MPLS for Foundry NetIron > and Riverstone > > > RS8000? Are they compatible with other vendor ? Any > comment on their > > > performance ? > > > > > > ------- > > > The MPLS-OPS Mailing List > > > Subscribe/Unsubscribe: http://www.mplsrc.com/mplsops.shtml > > > Archive: http://www.mplsrc.com/mpls-ops_archive.shtml > > > > > > > > > > > > > > > > > > > > > ************************************************************** > > > ************* > > > This e-mail is from 186k Limited and is intended only for the > > > addressee named above. As this e-mail may contain confidential > > > or privileged information, if you are not the named addressee or > > > the person responsible for delivering the message to the named > > > addressee, please advise the sender by return e-mail. The > > > contents should not be disclosed to any other person nor copies > > > taken. > > > 186k Limited is a Lattice Group company, registered in England > > > & Wales No. 3751494 Registered Office 130 Jermyn Street, > > > London SW1Y 4UR > > > http://www.186k.co.uk > > > ************************************************************** > > > ************* > > > > > > ------- > > > The MPLS-OPS Mailing List > > > Subscribe/Unsubscribe: http://www.mplsrc.com/mplsops.shtml > > > Archive: http://www.mplsrc.com/mpls-ops_archive.shtml > > > > ------- > > The MPLS-OPS Mailing List > > Subscribe/Unsubscribe: http://www.mplsrc.com/mplsops.shtml > > Archive: http://www.mplsrc.com/mpls-ops_archive.shtml > ------- The MPLS-OPS Mailing List Subscribe/Unsubscribe: http://www.mplsrc.com/mplsops.shtml Archive: http://www.mplsrc.com/mpls-ops_archive.shtml
|
|