The MPLS-OPS Archive[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index][Thread Index][Author Index][Subject Index] RE: Fwd: FW: MPLS on Foundry and Riverstone
If you noted I was referring to the Martini Draft foundry are not shipping
Martini draft MPLS unless you know something I don't?
Duane Wright
"Marshall
Eisenberg" To: <Duane.Wright@186K.co.uk>, "'Tony Erwin'" <tonyerwin@yahoo.com>
<marshall@found cc: <ktho@cabletv.com.hk>, <mpls-ops@mplsrc.com>
rynet.com> Fax to:
Subject: RE: Fwd: FW: MPLS on Foundry and Riverstone
24/10/2001
19:20
Please respond
to marshall
Duane,
I hate to point this out but your 'good source' is not so good...
Foundry first shipped and demonstrated multivendor interoperable MPLS
RSVP-TE/OSPF in April of 2001 at George Mason University's Advance
Interoperability Lab (and we are a principle member in Virginia.
Riverstone is not a member and did not appear in this testing event.
http://www.foundrynet.com/about/newsevents/releases/pr4_25_01a.html
Foundry participated in multivendor interoperable MPLS RSVP-TS/OSPF
testing in May of 2001 at NetWorld + InterOp Las Vegas at the iLabs
booth.
Foundry demonstrated Draft-Martini in May of 2001 at Supercomm in
Atlanta.
http://www.foundrynet.com/about/newsevents/releases/pr5_8_01b.html
Foundry demonstrated multivendor inoperable MPLS RSVP-TE/OSPF in June of
2001. Again, Riverstone is not a member and did not participate in the
testing opportunity.
http://www.iol.unh.edu/consortiums/mpls/
Foundry demonstrated multivendor interoperable Draft-Martini and
RSVP-TE/OSPF in September 2001 at Network + InterOp Atlanta at the
iLabs booth.
Foundry's RSVP-TE code has been shipping since April of 2001, the
Draft-Martini code will ship with the 7.5.02 software version scheduled
for release at the end of October 2001. Customers with valid NetIron
Internet router support contracts will receive that capability as part
of the normal software release.
The beta version of the code has been available for some time.
Foundry has demonstrated interoperability with Cisco, Juniper, Laurel,
Riverstone, Avici, WANDL, Agilent, Spirent, and many other vendors.
Regards,
Marshall
408.586.1754 direct
408.586.1900 fax
408.398.0014 cell
-----Original Message-----
From: Duane.Wright@186k.co.uk [mailto:Duane.Wright@186k.co.uk]
Sent: Wednesday, October 24, 2001 7:53 AM
To: Tony Erwin
Cc: ktho@cabletv.com.hk; mpls-ops@mplsrc.com
Subject: Re: Fwd: FW: MPLS on Foundry and Riverstone
I have it on good source that Foundry are not shipping Martini Draft
please
check there web site.
Duane Wright
Tony Erwin
<tonyerwin@ya To: mpls-ops@mplsrc.com,
Duane.Wright@186k.co.uk, ktho@cabletv.com.hk
hoo.com> cc:
Fax to:
24/10/2001 Subject: Fwd: FW: MPLS on
Foundry and Riverstone
14:02
Foundry started showing interoperability of Draft
Martini back in June. You should check with your
local rep because Foundry does have Martini draft
support.
Tony
> The Foundry NetIron at present doesn't run MPLS
> martini draft or Kompella
> but there is interop info available.
> Riverstone has already implemented Martini draft and
> it has been tested
> with Juniper's & Cisco.
> As regards the performance if the Riverstone it
> works well.
> In addition there is another emerging standard the
> Lasserre draft which is
> worth watching.
> Perhaps if your more specific in what your
> attempting to do I could shed
> more light on the matter.
>
>
> Duane Wright
>
>
>
>
>
> "Ho, Kin Tak"
> <ktho@cabletv To:
> <mpls-ops@mplsrc.com>
> .com.hk> cc:
> Fax to:
> 24/10/2001 Subject:
> MPLS on Foundry and
> Riverstone
> 05:49
> Please
> respond to
> ktho
>
>
>
>
>
>
> Does anyone have experience of MPLS for Foundry
> NetIron and Riverstone
> RS8000? Are they compatible with other vendor ? Any
> comment on their
> performance ?
>
> -------
> The MPLS-OPS Mailing List
> Subscribe/Unsubscribe:
> http://www.mplsrc.com/mplsops.shtml
> Archive:
> http://www.mplsrc.com/mpls-ops_archive.shtml
>
>
>
>
>
>
>
************************************************************************
***
> This e-mail is from 186k Limited and is intended
> only for the
> addressee named above. As this e-mail may contain
> confidential
> or privileged information, if you are not the named
> addressee or
> the person responsible for delivering the message to
> the named
> addressee, please advise the sender by return
> e-mail. The
> contents should not be disclosed to any other person
> nor copies
> taken.
> 186k Limited is a Lattice Group company, registered
> in England
> & Wales No. 3751494 Registered Office 130 Jermyn
> Street,
> London SW1Y 4UR
> http://www.186k.co.uk
>
************************************************************************
***
>
> -------
> The MPLS-OPS Mailing List
> Subscribe/Unsubscribe:
> http://www.mplsrc.com/mplsops.shtml
> Archive:
> http://www.mplsrc.com/mpls-ops_archive.shtml
>
__________________________________________________
Do You Yahoo!?
Make a great connection at Yahoo! Personals.
http://personals.yahoo.com
************************************************************************
***
This e-mail is from 186k Limited and is intended only for the
addressee named above. As this e-mail may contain confidential
or privileged information, if you are not the named addressee or
the person responsible for delivering the message to the named
addressee, please advise the sender by return e-mail. The
contents should not be disclosed to any other person nor copies
taken.
186k Limited is a Lattice Group company, registered in England
& Wales No. 3751494 Registered Office 130 Jermyn Street,
London SW1Y 4UR
http://www.186k.co.uk
************************************************************************
***
-------
The MPLS-OPS Mailing List
Subscribe/Unsubscribe: http://www.mplsrc.com/mplsops.shtml
Archive: http://www.mplsrc.com/mpls-ops_archive.shtml
-------
The MPLS-OPS Mailing List
Subscribe/Unsubscribe: http://www.mplsrc.com/mplsops.shtml
Archive: http://www.mplsrc.com/mpls-ops_archive.shtml
-------
The MPLS-OPS Mailing List
Subscribe/Unsubscribe: http://www.mplsrc.com/mplsops.shtml
Archive: http://www.mplsrc.com/mpls-ops_archive.shtml
|
|