The MPLS-OPS Archive

Cell Relay Retreat>MPLS-OPS Archive>month:2002-Aug> msg00097



[Date Prev][Date Next][Thread Prev][Thread Next]  
  [Date Index][Thread Index][Author Index][Subject Index]

Re: Problems with Redistribution EIGRP into BGP

  • From: Ajay Simha <asimha@cisco.com>
  • Date: Thu, 15 Aug 2002 09:51:15 -0400 (EDT)
  • cc: mpls-ops@mplsrc.com
  • Resent-Date: Thu, 15 Aug 2002 11:07:26 -0400
  • To: alok <alok.dube@apara.com>
  • X-MIME-Autoconverted: from QUOTED-PRINTABLE to 8bit by host.secure4-hosting.net id g7FDpLT24371

On Thu, 15 Aug 2002, alok wrote:

>a:How does it matter?
>a:
>a:....he says he is running E-BGP with his PE... not EIGRP....
>a:his MPLS core may not be cisco too...

You are right. I was trying to respond to "EIGRP may be avilable for PE-CE ask
Cisco..." part.

-ajay
>a:
>a:rgds
>a:Alok
>a:----- Original Message -----
>a:From: Ajay Simha <asimha@cisco.com>
>a:To: Yinglam Cheung <rcheung@houston.sns.slb.com>
>a:Cc: Vergara, Hugo <Hugo.Vergara@getronics.com>; <mpls-ops@mplsrc.com>;
>a:Salcedo, Martin <Martin.Salcedo@getronics.com>; Castaneda, Vicente
>a:<Vicente.Castaneda@getronics.com>
>a:Sent: Thursday, August 15, 2002 12:22 AM
>a:Subject: RE: [MPLS-OPS]: Problems with Redistribution EIGRP into BGP
>a:
>a:
>a:On Wed, 14 Aug 2002, Yinglam Cheung wrote:
>a:
>a:It says right here:
>a:
>a:http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/relnote/7000
>a:fam/rn120s.htm#64834
>a:
>a:-ajay
>a:>YC:The link the document referred to is broken:
>a:>YC:http://www.cisco.com/univercd/cc//td/doc/product/software/ios120/120newf
>a:t/12
>a:>YC:0limit/120s/120s22/sei gpece.htm
>a:>YC:I check the 12.0(22)S feature document and it doesn't list EIGRP.
>a:>YC:
>a:>YC:best regards,
>a:>YC:Yinglam (Raymond) Cheung
>a:>YC:Double CCIE #6961
>a:>YC:Senior Network Engineer
>a:>YC:Schlumberger Network Infrastructure Solutions
>a:>YC:Tel: 1 (713) 513-3285
>a:>YC:Cell:1 (832) 274-0126
>a:>YC:
>a:>YC:-----Original Message-----
>a:>YC:From: Ajay Simha [mailto:asimha@cisco.com]
>a:>YC:Sent: Wednesday, August 14, 2002 12:33 PM
>a:>YC:To: Yinglam Cheung
>a:>YC:Cc: Vergara, Hugo; mpls-ops@mplsrc.com; Salcedo, Martin; Castaneda,
>a:>YC:Vicente
>a:>YC:Subject: RE: [MPLS-OPS]: Problems with Redistribution EIGRP into BGP
>a:>YC:
>a:>YC:
>a:>YC:On Wed, 14 Aug 2002, Yinglam Cheung wrote:
>a:>YC:
>a:>YC:>YC:We have done this for quite a few large customers running EIGRP in
>a:their
>a:>YC:>YC:networks.
>a:>YC:>YC:You may want to check if there is any backdoor issues within
>a:customer
>a:>YC:>YC:network. In some case, customer has a backdoor between two sites,
>a:and
>a:>YC:the
>a:>YC:>YC:backdoor is preferred over the MPLS network because the internal
>a:EIGRP
>a:>YC:>YC:routes (AD: 90) is preferred over the external EIGRP routes (AD:
>a:170)
>a:>YC:>YC:redistributed from EBGP no matter what metric it is. You could
>a:adjust
>a:>YC:this
>a:>YC:>YC:on the CE.
>a:>YC:>YC:Other issues are like asymetric routing. Customers may not get the
>a:paths
>a:>YC:>YC:they like (not necessary the best path) especially when you have
>a:route
>a:>YC:>YC:reflector in place in MPLS network. Of course you can customize
>a:your
>a:>YC:>YC:network design to meet customer needs.
>a:>YC:>YC:One more thing you can check with Cisco is that, when they are going
>a:to
>a:>YC:>YC:support EIGRP over PE-CE?
>a:>YC:
>a:>YC:Yes it is supported in 12.0(22)S:
>a:>YC:
>a:>YC:http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/relnote/
>a:7000
>a:>YC:fam/rn120s.htm#xtocid12
>a:>YC:
>a:>YC:-ajay
>a:>YC:>YC:
>a:>YC:>YC:best regards,
>a:>YC:>YC:Yinglam (Raymond) Cheung
>a:>YC:>YC:Double CCIE #6961
>a:>YC:>YC:Senior Network Engineer
>a:>YC:>YC:Schlumberger Network Infrastructure Solutions
>a:>YC:>YC:Tel: 1 (713) 513-3285
>a:>YC:>YC:Cell:1 (832) 274-0126
>a:>YC:>YC:
>a:>YC:>YC:-----Original Message-----
>a:>YC:>YC:From: Vergara, Hugo [mailto:Hugo.Vergara@getronics.com]
>a:>YC:>YC:Sent: Monday, August 12, 2002 2:49 PM
>a:>YC:>YC:To: mpls-ops@mplsrc.com
>a:>YC:>YC:Cc: Salcedo, Martin; Castaneda, Vicente
>a:>YC:>YC:Subject: [MPLS-OPS]: Problems with Redistribution EIGRP into BGP
>a:>YC:>YC:
>a:>YC:>YC:
>a:>YC:>YC:Hi Team,
>a:>YC:>YC:
>a:>YC:>YC:I have a Network Internal with EIGRP ( Cisco Equipment), My customer
>a:>YC:wants
>a:>YC:>YC:to connect to MPSL Network ( By Alestra AT&T), As you know only four
>a:>YC:>YC:protocols could be used to connect to MPLS Network ( RIPv2, Static
>a:>YC:Route,
>a:>YC:>YC:OSPF and BGP ). Alestra said us that We used BGP.
>a:>YC:>YC:
>a:>YC:>YC:The topology is the next:
>a:>YC:>YC:
>a:>YC:>YC:
>a:>YC:>YC:        ------------------------------------
>a:>YC:>YC:                -----------                         -------------
>a:>YC:>YC:/
>a:>YC:>YC:
>a:>YC:>YC:                 -----------------                   ---------------
>a:----
>a:>YC:----
>a:>YC:>YC:-
>a:>YC:>YC:               /           /                       /             /
>a:>YC:>YC:/                                   /                   /
>a:>YC:/
>a:>YC:>YC:/                     /
>a:>YC:>YC:    /           / --------------------- /
>a:/----------------
>a:>YC:/
>a:>YC:>YC:/------------------ /                /------------------ /
>a:>YC:>YC:/
>a:>YC:>YC:               /           /                       /             /
>a:>YC:E-BGP
>a:>YC:>YC:/                                   /   E-BGP      /
>a:/
>a:>YC:>YC:/                    /
>a:>YC:>YC:                -----------                         -------------
>a:>YC:>YC:/
>a:>YC:>YC:
>a:>YC:>YC:              ----------------                     -----------------
>a:----
>a:>YC:>YC:
>a:>YC:>YC:       -------------------------------------
>a:>YC:>YC:
>a:>YC:>YC:       EIGRP Network                        CE-1
>a:>YC:>YC:MPLS Network                         CE-2 EIGRP Network
>a:>YC:>YC: AT&T
>a:>YC:>YC:
>a:>YC:>YC:
>a:>YC:>YC:We set E-BGP between CE and the MPLS Network, We have 15 CE around
>a:the
>a:>YC:MPLS
>a:>YC:>YC:Network.
>a:>YC:>YC:The VPN´s  works fine, Beacuse all the CE´s look on the VPN. But
>a:some
>a:>YC:routes
>a:>YC:>YC:the router doesn´t updates in some routers.
>a:>YC:>YC:
>a:>YC:>YC:We redistribuit EIGRP into BGP, so we think that the problem is for
>a:>YC:>YC:redistribution from EIGRP to BGP.....
>a:>YC:>YC:
>a:>YC:>YC:Do you have some example or tip ????
>a:>YC:>YC:Did somebody have the same case or problem ?????
>a:>YC:>YC:
>a:>YC:>YC:
>a:>YC:>YC:
>a:>YC:>YC:Hugo Vergara Trejo
>a:>YC:>YC:Network Engineer
>a:>YC:>YC:Service Providers
>a:>YC:>YC:
>a:>YC:>YC:Getronics México
>a:>YC:>YC:
>a:>YC:>YC:-------
>a:>YC:>YC:The MPLS-OPS Mailing List
>a:>YC:>YC:Subscribe/Unsubscribe:  http://www.mplsrc.com/mplsops.shtml
>a:>YC:>YC:Archive: http://www.mplsrc.com/mpls-ops_archive.shtml
>a:>YC:>YC:
>a:>YC:>YC:-------
>a:>YC:>YC:The MPLS-OPS Mailing List
>a:>YC:>YC:Subscribe/Unsubscribe:  http://www.mplsrc.com/mplsops.shtml
>a:>YC:>YC:Archive: http://www.mplsrc.com/mpls-ops_archive.shtml
>a:>YC:>YC:
>a:>YC:
>a:>YC:
>a:
>a:
>a:-------
>a:The MPLS-OPS Mailing List
>a:Subscribe/Unsubscribe:  http://www.mplsrc.com/mplsops.shtml
>a:Archive: http://www.mplsrc.com/mpls-ops_archive.shtml
>a:
>a:
>a:
>a:-------
>a:The MPLS-OPS Mailing List
>a:Subscribe/Unsubscribe:  http://www.mplsrc.com/mplsops.shtml
>a:Archive: http://www.mplsrc.com/mpls-ops_archive.shtml
>a:


-------
The MPLS-OPS Mailing List
Subscribe/Unsubscribe:  http://www.mplsrc.com/mplsops.shtml
Archive: http://www.mplsrc.com/mpls-ops_archive.shtml