The MPLS-OPS Archive

Cell Relay Retreat>MPLS-OPS Archive>month:2002-Mar> msg00154



[Date Prev][Date Next][Thread Prev][Thread Next]  
  [Date Index][Thread Index][Author Index][Subject Index]

32 bits mask destination for LSP Tunnel

  • From: "SAAD SHEIKH" <sash_10@hotmail.com>
  • Date: Sat, 23 Mar 2002 23:24:43 +0000
  • Cc: raszuk@cisco.com
  • Resent-Date: Sat, 23 Mar 2002 19:42:10 -0500
  • To: mpls-ops@mplsrc.com
  • X-OriginalArrivalTime: 23 Mar 2002 23:24:43.0700 (UTC) FILETIME=[E9DA3F40:01C1D2C1]
  • X-Originating-IP: [216.94.112.2]

Hi All,

Is it a neccessary condition for setting up an LSP Tunnel (with RSVP or LDP) 
from Cisco Routers as Ingress,to use 32 bits mask address as destination ?? 
that's why we use Loopback address as Tunnel destination. Is it a MUST TO DO 
thing or we can use any bit mask tunnel destination, specially in case of a 
Non-Broadcast media or Point-to-Point media.

Please advise,

Thanks
Saad Sheikh

_________________________________________________________________
Send and receive Hotmail on your mobile device: http://mobile.msn.com

-------
The MPLS-OPS Mailing List
Subscribe/Unsubscribe:  http://www.mplsrc.com/mplsops.shtml
Archive: http://www.mplsrc.com/mpls-ops_archive.shtml