The MPLS-OPS Archive

Cell Relay Retreat>MPLS-OPS Archive>month:2002-Oct> msg00079



[Date Prev][Date Next][Thread Prev][Thread Next]  
  [Date Index][Thread Index][Author Index][Subject Index]

RE: REG: Filtering of MPLS VPN routes

  • From: "Joe Lin" <jlin@doradosoftware.com>
  • Date: Mon, 14 Oct 2002 09:28:39 -0700
  • Cc: "'Joseph Anthony'" <tonyjoe20002002@yahoo.co.in>, <rogerw@nordlink.com>, <mpls-ops@mplsrc.com>
  • Importance: Normal
  • Resent-Date: Mon, 14 Oct 2002 13:49:40 -0400
  • To: "'alok'" <alok.dube@apara.com>, "'Rajiv Asati'" <rajiva@cisco.com>

ORF: outbound route filtering.  Instead of receiving and filtering out
unwanted routes, you can tell the other end what you want to receive.

ORF can be ignored if not implemented.




-----Original Message-----
From: alok [mailto:alok.dube@apara.com] 
Sent: Sunday, October 13, 2002 1:01 PM
To: Rajiv Asati
Cc: Joseph Anthony; rogerw@nordlink.com; mpls-ops@mplsrc.com
Subject: Re: [MPLS-OPS]: REG: Filtering of MPLS VPN routes

well yes....

for starters can u please tell me what ORF means? and how does cisco
carry
out BGP updates for multiple VPNs? dont u use route distinguishers? as
proposed in RFC2547 ?



----- Original Message -----
From: Rajiv Asati <rajiva@cisco.com>
To: alok <alok.dube@apara.com>
Cc: Joseph Anthony <tonyjoe20002002@yahoo.co.in>; <rogerw@nordlink.com>;
<mpls-ops@mplsrc.com>
Sent: Monday, October 14, 2002 1:14 AM
Subject: Re: [MPLS-OPS]: REG: Filtering of MPLS VPN routes


Alok,

At 10:29 AM 10/13/2002, alok wrote:
>have been following this thread for a while so ...as i started getting
>lost, i thought id ask a question....
>
>wouldnt RRs be "per vrf based"?

RR typically does not have any VRF configured.
Are you referring to any other implementation ?

 From my understanding,  Joseph was referring to extcomm based filtering
on
RR. Since he mentioned IOS CLI "bgp rr-group", I assumed he was
referring
to Cisco's implementation.

Cheers,
Rajiv

>so in that case wudnt the vrf be assoicated with a "RD" flag...?
>
>how would ever spill over routes at all...i guess u mean "spill over
>routes of other VPNs".... then the answer is you wont coz the NLRIs
have
>the RD field indicating which VPN the route belongs too....
>
>so i doubt if u will ever need filters at all.....
>for this case...unless u want to block certain routes in the same
VPN...
>
>unless cisco does something different from "RDs"...havent done MPLS
VPNs
>on cisco but only junipers and zebra etc..so am not sure on this...
>
>-rgds
>Alok
>>----- Original Message -----
>>From: <mailto:tonyjoe20002002@yahoo.co.in>Joseph Anthony
>>To: <mailto:rajiva@cisco.com>Rajiv Asati ;
>><mailto:rogerw@nordlink.com>rogerw@nordlink.com
>>Cc: <mailto:mpls-ops@mplsrc.com>mpls-ops@mplsrc.com
>>Sent: Saturday, October 12, 2002 8:23 PM
>>Subject: Re: [MPLS-OPS]: REG: Filtering of MPLS VPN routes
>>
>>  Hi All,
>>
>>Thanks for all the inputs. I do have some questions in regard to
>>Route-Filtering pertaining to Route Reflectors configurations in an
MPLS
>>VPN environment. Assuming the following scenario -
>>
>>Now while using Extended community based filtering by means of the ORF
>>for route filtering. My question is as follows -
>>
>>1. In a partitioned RR setup, should all the RR clients and RR server
>>have the extended community list and bgp-rr group configured on them,
in
>>order to facilitate both outbound and inbound filtering (dynamic).
>>
>>Assuming I have 2 RR's, each servicing a set of VPN's. Now in a
situation
>>in which an existing PE router suddenly needs to service a VPN, to
which
>>it has not provided routes previously, I understand that we would need
to
>>have the PE router establish an additional session to the other
>>Route-reflector, which is currently reflecting routes to its clients
for
>>the particular VPN. This requires filtering to happen at the PE,
wherein
>>the PE should not spill over unwanted VPN routes to either of the
RR's.
>>Now while using Extended community based filtering by means of the ORF
>>for route filtering. My question is as follows -
>>
>>1. How would the same work here? Any sample config will be greatly
>>appreciated.
>>
>>Thanks in advance,
>>
>>Tony.
>>
>>
>>
>>Yahoo! Properties Special Buy, sell, rent...your flat, or even post an
ad



-------
The MPLS-OPS Mailing List
Subscribe/Unsubscribe:  http://www.mplsrc.com/mplsops.shtml
Archive: http://www.mplsrc.com/mpls-ops_archive.shtml



-------
The MPLS-OPS Mailing List
Subscribe/Unsubscribe:  http://www.mplsrc.com/mplsops.shtml
Archive: http://www.mplsrc.com/mpls-ops_archive.shtml