The MPLS-OPS Archive

Cell Relay Retreat>MPLS-OPS Archive>month:2002-Sep> msg00135



[Date Prev][Date Next][Thread Prev][Thread Next]  
  [Date Index][Thread Index][Author Index][Subject Index]

Frame based MPLS between an Unisphere ERX and a CISCO 7507

  • From: panos@noc.uoa.gr
  • Date: Fri, 27 Sep 2002 02:37:56 +0300
  • Resent-Date: Thu, 26 Sep 2002 21:06:45 -0400
  • To: mpls-ops@mplsrc.com
  • User-Agent: Internet Messaging Program (IMP) 3.1

Hi to all,

Some minutes ago i found out that the mpls topology-driven-lsp command should 
be augmented with the following two commands:

mpls topology-driven-lsp ip-interfaces egress access-list test
mpls topology-driven-lsp ip-interfaces ingress access-list test

where :

access-list test permit ip any any

It seems that the ERX does not forward labeled packets as an ingress or as an 
egress if these two commands are not in place. 

Any better explanation will be greatly appreciated.

Thank you,

Panos Kolyvas
Network Operations Center
University of Athens
Greece.

-------
The MPLS-OPS Mailing List
Subscribe/Unsubscribe:  http://www.mplsrc.com/mplsops.shtml
Archive: http://www.mplsrc.com/mpls-ops_archive.shtml