The MPLS-OPS Archive

[Martin Heusinger <MHeusinger@gmx.net>]

Hi Dana,

see my comments inline.

Cheers

Martin

On Tue, 18 Feb 2003 08:09:27 -0500, <dwk@danakonkin.com> wrote:

> Apologies, for after reading the last few weeks of this list I am still
> unclear on the RD/RT issue, so I hope you do not mind if I ask another
> question.
>
>
> The config:
>
> PE2(config)#ip vrf HOSTNAME PE2(config-vrf)#rd 100:27 PE2(config-vrf) 
> #route-target import 2:2
>
> My humble understanding is this will result in the creation of a vrf on 
> PE2
> (assuming there exists appropriate BGP address-family config) of 
> 'HOSTNAME'
> and the prefixes will be 'converted' to VPN-IPv4 by prepending the RD 
> 100:27
> onto the IPv4 prefix.
> Additionally, any prefixes carried by MP-BGP to PE2 with the Extended
> Community attribute as 2:2 will be installed into the 'HOSTNAME' vrf on 
> PE2
> as routes. (please tell me if I am wrong)

This is quite right! One question: Where do you think these routes with 2:2 
would come from? Or more specific: How are these VPNv4 prefixes "marked" 
with the extended BGP community 2:2?

>
>
> PE2(config-vrf)#route-target export 2:2
>
> Hmmm, I am not sure about this. 1. What purpose does this serve if those 
> VPN-IPv4 prefixes already are being
> carried in MP-BGP ?

Well here is the answer to the question I asked above: this is the way to 
tell the PE (and similar VRFs on other PEs) to add the RT 2:2 to all VPNv4 
prefixes learned from CE routers attached to this VRF when sending MP-BGP 
updates to other PEs.


>
> 2. Or does this export the ENTIRE set of prefixes in the 'HOSTNAME' vrf 
> with
> the Extended Community attribute of 2:2 ?

Not quite! The entire set of prefixes consists of those learned from CE 
routers (Rt 2:2 is attached by this PE when sending them to other PEs) and 
those learned through MP-BGP. The latter have already a set of RTs 
attached. They will not be modified nor will they be sent to other PEs in 
MP-iBGP.

>
> 3. Does this mean that he RD (rd 100:27) on PE2 for vfr 'HOSTNAME' is 
> only
> locally significant to PE2 ?

No. It is globally (i.e. in the whole world of MPLS VPNs) significant. 
There is however no special meaning to a RD. Its only purpose is to make 
VPNv4 (f.e. 100:345:10.1.0.0) globally unique.

>
> and then,
> 4. Does the RT 2:2 determine that all the prefixes contained in vrf
> 'HOSTNAME' will be propagated from PE2 into MP-BGP with Extended 
> Community
> attribute 2:2 ?

Not all prefixes. Only those learned from CEs attached to this VRF. The PE 
is not allowed to treat all IPv4 prefixes like this, as they might be 
coming from VPNv4 routes learned through MP-BGP - in short, this is normal 
MP-iBGP loop prevention.


>
>
> Many thanks ,
>
> Dana Konkin
>
> -------
> The MPLS-OPS Mailing List
> Subscribe/Unsubscribe:  http://www.mplsrc.com/mplsops.shtml
> Archive: http://www.mplsrc.com/mpls-ops_archive.shtml
>
>



-- 
Dr. Martin Heusinger
Consulting Manager Central European Region
CCIE #5980 CCSI 98285

Global Knowledge
Hungener Str. 6
60389 Frankfurt

Tel.: +49 69 90556700
FAX:  +49 69 90556729

mailto:Martin.Heusinger@GlobalKnowledge.de
web:   www.globalknowledge.de

-------
The MPLS-OPS Mailing List
Subscribe/Unsubscribe:  http://www.mplsrc.com/mplsops.shtml
Archive: http://www.mplsrc.com/mpls-ops_archive.shtml