The MPLS-OPS Archive

["Lars Higham" <lhigham@yahoo.com>]

You are correct - no CSPF, no TED requirement -

Regards,
Lars

-----Original Message-----
From: Terry Lee [mailto:terrylee@huawei.com] 
Sent: Monday, July 28, 2003 6:44 AM
To: carlos@carlos.net; richard.james@rogers.com
Cc: mpls-ops@mplsrc.com
Subject: RE: [MPLS-OPS]: RSVP LSP without CSPF?


Hi
If it works without cspf, I think ospt-te isn't needed in this case.  am
I right?  




Thanks and Regards,
Terry Lee

> -----Original Message-----
> From: carlos@carlos.net [mailto:carlos@carlos.net]
> Sent: Saturday, July 26, 2003 8:58 AM
> To: richard.james@rogers.com
> Cc: mpls-ops@mplsrc.com
> Subject: Re: [MPLS-OPS]: RSVP LSP without CSPF?
> 
> 
> On Fri, 25 Jul 2003 17:22:20 -0400,
> richard.james@rogers.com wrote:
> 
> cisco has an option "verbatim" , juniper and others
> support it with "no-cspf"
> 
> thx
> 
> carlos
> 
> > 
> > Hi,
> > Is it possible to configure an RSVP tunnel with IOS so
> > that it doesn't run CSPF, but only uses the
> > strict/loose path? This is when you want to ignore bandwidth and 
> > color constraints and only use the ERO
> to
> > compute the path.
> > 
> > I haven't been able to find an option for this in the
> > docs, but if it's there I'd appreciate if someone
> could
> > point me to the command name.
> > 
> > Thanks,
> > Richard
> > 
> > 1
> > 
> > -------
> > The MPLS-OPS Mailing List
> > Subscribe/Unsubscribe:
> > http://www.mplsrc.com/mplsops.shtml
> > Archive: http://www.mplsrc.com/mpls-ops_archive.shtml
> 
> -------
> The MPLS-OPS Mailing List
> Subscribe/Unsubscribe:  http://www.mplsrc.com/mplsops.shtml
> Archive: http://www.mplsrc.com/mpls-ops_archive.shtml
> 

-------
The MPLS-OPS Mailing List
Subscribe/Unsubscribe:  http://www.mplsrc.com/mplsops.shtml
Archive: http://www.mplsrc.com/mpls-ops_archive.shtml

-------
The MPLS-OPS Mailing List
Subscribe/Unsubscribe:  http://www.mplsrc.com/mplsops.shtml
Archive: http://www.mplsrc.com/mpls-ops_archive.shtml