The MPLS-OPS Archive

["Lars Higham" <lhigham@yahoo.com>]

You should be able to enable jumbo frames; it says the MSFC can't route
them, but maybe the MSFC2 can - I don't know -

http://www.cisco.com/en/US/products/hw/switches/ps708/products_command_r
eference_chapter09186a0080121daa.html#1098630

-----Original Message-----
From: jgrewal [mailto:j.grewal@in.spectranet.com] 
Sent: Tuesday, July 29, 2003 4:05 PM
To: M. ELK; lhigham@yahoo.com; carlos@carlos.net; mpls-ops@mplsrc.com
Subject: Re: [MPLS-OPS]: L2 VPN over MPLS


i have tried various mtu size on router interface....but still problem
persist....these routers are connected through 6509 Switch with
Sup-Engine....i tried change mtu size on switch interface but thats not
allowed...is there any other way i could solve this problem......

J.Grewal


----- Original Message ----- 
From: "M. ELK" <elkou141061@hotmail.com>
To: <lhigham@yahoo.com>; <carlos@carlos.net>;
<j.grewal@in.spectranet.com>; <mpls-ops@mplsrc.com>
Sent: Tuesday, July 29, 2003 3:55 PM
Subject: RE: [MPLS-OPS]: L2 VPN over MPLS


>
> Lars
>
> By 8 or by 12 (the CTRL WORD) ? .
>
> Brgds
>
> >From: "Lars Higham" <lhigham@yahoo.com>
> >To: "'carlos'" <carlos@carlos.net>, "'jgrewal'"
> ><j.grewal@in.spectranet.com>,   <mpls-ops@mplsrc.com>
> >Subject: RE: [MPLS-OPS]: L2 VPN over MPLS
> >Date: Tue, 29 Jul 2003 11:54:31 +0530
> >
> >Or you could increase the mtu for each ehternet and/or serial link by

> >8 bytes
> >
> >-----Original Message-----
> >From: carlos [mailto:carlos@carlos.net]
> >Sent: Tuesday, July 29, 2003 10:28 AM
> >To: jgrewal; mpls-ops@mplsrc.com
> >Subject: Re: [MPLS-OPS]: L2 VPN over MPLS
> >
> >
> >You need to figure out MTU/MRU between the routers and found out 
> >(sniff
> >) which router the packet is really getting dropped.
> >
> >
> >Carlos
> >
> >----- Original Message -----
> >From: "jgrewal" <j.grewal@in.spectranet.com>
> >To: <mpls-ops@mplsrc.com>
> >Sent: Monday, July 28, 2003 4:32 AM
> >Subject: [MPLS-OPS]: L2 VPN over MPLS
> >
> >
> > > Dear All,
> > >
> > > I am tring L2VPN over MPLS on two cisco 7206 routers. I have 
> > > configured it right...vc is open at both end...if i connect two 
> > > PCs on
> >
> > > each end i could ping also...but i am unable to do ftp and http 
> > > through this vpn....seems like problem with MTU size...but i have 
> > > tried varioue MTU size but result same.....if anyone got solution 
> > > to this...would be gr8 help for me.....
> > >
> > >
> > > Thanks & Regards
> > >
> > > J.S.Grewal
> > >
> > > -------
> > > The MPLS-OPS Mailing List
> > > Subscribe/Unsubscribe:  http://www.mplsrc.com/mplsops.shtml
> > > Archive: http://www.mplsrc.com/mpls-ops_archive.shtml
> > >
> >
> >-------
> >The MPLS-OPS Mailing List
> >Subscribe/Unsubscribe:  http://www.mplsrc.com/mplsops.shtml
> >Archive: http://www.mplsrc.com/mpls-ops_archive.shtml
> >
> >-------
> >The MPLS-OPS Mailing List
> >Subscribe/Unsubscribe:  http://www.mplsrc.com/mplsops.shtml
> >Archive: http://www.mplsrc.com/mpls-ops_archive.shtml
>
> _________________________________________________________________
> MSN 8 with e-mail virus protection service: 2 months FREE* 
> http://join.msn.com/?page=features/virus
>
>

-------
The MPLS-OPS Mailing List
Subscribe/Unsubscribe:  http://www.mplsrc.com/mplsops.shtml
Archive: http://www.mplsrc.com/mpls-ops_archive.shtml

-------
The MPLS-OPS Mailing List
Subscribe/Unsubscribe:  http://www.mplsrc.com/mplsops.shtml
Archive: http://www.mplsrc.com/mpls-ops_archive.shtml