The MPLS-OPS Archive

Cell Relay Retreat>MPLS-OPS Archive>month:2003-Nov> msg00030



[Date Prev][Date Next][Thread Prev][Thread Next]  
  [Date Index][Thread Index][Author Index][Subject Index]

Re: L2 CE Device-BGP/MPLS L3 VPN

  • From: "M. ELK" <elkou141061@hotmail.com>
  • Date: Mon, 10 Nov 2003 05:49:58 +0000
  • Resent-Date: Mon, 10 Nov 2003 01:18:07 -0500
  • To: Devendra.Vyas@relianceinfo.com, mpls-ops@mplsrc.com
  • X-OriginalArrivalTime: 10 Nov 2003 05:49:59.0435 (UTC) FILETIME=[7A1A7DB0:01C3A74E]
  • X-Originating-Email: [elkou141061@hotmail.com]
  • X-Originating-IP: [57.250.229.136]


Devendra

AFAIK

Within the scope of RFC 2574 bis , never heard about  : "  i have heard 
there is a workaround for such scenarios wherein...a sort of virtual router 
that mimics a L3 CE device is created on the PE of the
provider which connects to L2 CE..and the VPN in turn starts from the PE 
connecting to this PE. "

Since the CE in this case is not L3 speaker so we need to define statically 
the routing ,
on the PE we use static routing and on the HOST's (connected through the 
switch ) using
a default routing pointing to the PE port .


Brgds

>From: Devendra.Vyas@relianceinfo.com To: mpls-ops@mplsrc.com Subject: 
>[MPLS-OPS]: L2 CE Device-BGP/MPLS L3 VPN Date: Sun, 9 Nov 2003 02:46:04 
>+0530
>
>Hi,
>
>2547bis says
>
>"A customer edge (CE) device provides customer access to the service 
>provider network over a data link to one or more provider edge (PE) 
>routers. While the CE device can be a host or a Layer 2 switch, typically 
>the CE device is an IP router that establishes an adjacency with its 
>directly connected PE routers."
>
>Suppose a customer has a L2 CE device (switch) & his requirement is that he 
>has to be accomodated on to the Providers existing BGP/MPLS L3 VPN based 
>setup with his CE device.
>
>
>i have heard there is a workaround for such scenarios wherein...a sort of 
>virtual router that mimics a L3 CE device is created on the PE of the 
>provider which connects to L2 CE..and the VPN in turn starts from the PE 
>connecting to this PE. my question?? need clarity -whether this works and 
>how exactly this will work if it will.
>
>will be thankful to be referred to links that explore such a scenario
>
>Regards,
>
>Devendra Vyas
>
>
>
>------- The MPLS-OPS Mailing List Subscribe/Unsubscribe: 
>http://www.mplsrc.com/mplsops.shtml Archive: 
>http://www.mplsrc.com/mpls-ops_archive.shtml

_________________________________________________________________
STOP MORE SPAM with the new MSN 8 and get 2 months FREE* 
http://join.msn.com/?page=features/junkmail

-------
The MPLS-OPS Mailing List
Subscribe/Unsubscribe:  http://www.mplsrc.com/mplsops.shtml
Archive: http://www.mplsrc.com/mpls-ops_archive.shtml