The MPLS-OPS Archive

["Javier Perez LLedo" <javi.pll@telefonica.net>]

Hi,

In general terms, I agree Roger. But, under my understanding, it is not
obvious the question in the case of VPLS. The risk, I've observed is that a
low speed for the service could impact in the behaviour and performance of
the applications over a LAN (local broadcasts, response time, etc) when in
fact aren´t in local network, ;)

In the case of VPLS or EoMPLS, you should consider the apps the users will
run and their features, specially in you want to provide a low speed between
sites.

JAVI

-----Mensaje original-----
De: Roger Clark Williams [mailto:rogerw@nordlink.com] 
Enviado el: lunes, 22 de marzo de 2004 20:34
Para: MPLS-ops Mailing List
Asunto: Fwd: Re: [MPLS-OPS]: Question about L2VPN over MPLS

Luis,  Steinar is quite right, it depends. However, as an example, I am 
working now on a system that is using a GE-WAN interface from a Cisco 7606 
PE pointing towards the CEs. It will be configured as a Multi-VRF 
interface, passing a number of streams of various customers' traffic. How 
fast the traffic may actually travel will be based on the Service Level 
Agreement between the individual customer and the provider, right up to the 
capacity of the entire physical interface. There is nothing typical unless 
the provider is selling services that replace present standard telco 
services, in which case maybe a "typical" speed might be 64k, 128k, T1 or 
the like. It would be controlled by something like the Cisco IOS rate-limit 
command or the policing command which limits the customer to a given 
throughput.

Roger Williams


>X-Real-To: rogerw@nordlink.com
>Resent-Date: Mon, 22 Mar 2004 14:01:22 -0500
>X-Authentication-Warning: host.secure4-hosting.net: mplsrc12 set sender to 
>mpls-ops-request@mplsrc.com using -f
>To: luis-m-a-santos@telecom.pt
>Cc: mpls-ops@mplsrc.com
>Subject: Re: [MPLS-OPS]: Question about L2VPN over MPLS
>From: sthaug@nethelp.no
>X-Mailer: Mew version 1.05+ on Emacs 19.34.1
>Date: Mon, 22 Mar 2004 19:47:18 +0100
>Resent-From: mpls-ops@mplsrc.com
>X-Mailing-List: <mpls-ops@mplsrc.com> archive/latest/6905
>X-Loop: mpls-ops@mplsrc.com
>Resent-Sender: mpls-ops-request@mplsrc.com
>
> > Can anyone pls recommend one typical bit rate used between CE and
> > PE, on implementations of the VPLS service (Layer 2 VPNs) ? And the
> > technology of that Access?
>
>Why do you think there is such a thing as a typical bit rate between
>CE and PE?
>
>The bit rate will normally be whatever the customer wants (and pays
>for) - anything from 64 kbps to several Mbps. Similarly, there is no
>one typical access technology for VPLS - DSL, traditional serial lines
>and Ethernet are all examples of access technologies that can be used.
>
>I think you need to reformulate your question.
>
>Steinar Haug, Nethelp consulting, sthaug@nethelp.no
>
>-------
>The MPLS-OPS Mailing List
>Subscribe/Unsubscribe:  http://www.mplsrc.com/mplsops.shtml
>Archive: http://www.mplsrc.com/mpls-ops_archive.shtml

-------
The MPLS-OPS Mailing List
Subscribe/Unsubscribe:  http://www.mplsrc.com/mplsops.shtml
Archive: http://www.mplsrc.com/mpls-ops_archive.shtml     

-------
The MPLS-OPS Mailing List
Subscribe/Unsubscribe:  http://www.mplsrc.com/mplsops.shtml
Archive: http://www.mplsrc.com/mpls-ops_archive.shtml