Cell Relay Archive[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index][Thread Index][Author Index][Subject Index] Re: [Q] Does the Signalling VPI/VCI need to be configurable?
Andrew Valentine wrote: > > Hi, > > I have been looking into Q.2931 and have seen that the VPI/VCI for the > signalling channel is configurable. I have read that there is equipment such > as VP cross connects that do not allow VCIs below 16 and therefore the > signalling channel needs to be reconfigured from the default. > > Or has anybody any suggestions why it may need to be changed from the > default. >It may be needed for example when tunelling your signalling through the network that supports PVCs only. regards -- _________________________ Andrei Robachevsky Federal Centre RUNNet e-mail: andrei@run.net phone: +7-812-2388598 fax: +7-812-2327622 http://www.runnet.ru |
|