Cell Relay Archive[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index][Thread Index][Author Index][Subject Index] Re: SRTS
We had this same problem and went through all the iterations with FORE to solve it. I was having problems with CES T1s carrying video. I set up SRTS and it helped some. It turned out to be bad DS3 card in one of the switches and the only way we found it was swapping out cards. FORE couldn't explain it but they accepted it. agallo@foghorn.nit.gwu.edu wrote: > Question about Synchronous residual Time Stamp (SRTS): is it required for > implementing ATM over DS-3? I have a microwave based DS-3 connecting two > Marconi (FORE) 200BXs. One side is receiving framing errors, the other side > is relatively clean. The radio vendor (Nortel) is claiming that SRTS will be > required to make this link work. The switch vendor agrees that it may solve > the problem, but it is not required by the ATM Forum and customer demand > for this feature is almost non-existant on native (non CES) DS-3. > > I can't find info abour SRTS on the ATMF approved specs or spec watch page. > > TIA > > -- > > Andrew Gallo 202-994-9026 > IS Engineer > The George Washington University > ******************************************* > PGP Key available at http://gwu.edu/~agallo > *******************************************
|
|