The MPLS-OPS Archive

[Rajeev Manur <rmanur@force10networks.com>]

Here is the test setup :

GSR is the head-end of an explicit LSP. One of the interfaces of GSR is
configured with 21.21.21.3/24 as the ip addr. I am seeding the cfg below. I
have also truned all the debug messages. I don't see GSR initiating RSVP
signalling ? I would appreciate if any one can help me figure out the
problem in my cfg..

with regards,
Rajeev

global config dump :
==============
!
ip subnet-zero
ip ftp username anvltest
ip ftp password 7 03025419050A701C
no ip domain-lookup
ip host linuxx 172.16.1.239
ip host linux 25 172.16.1.51
ip name-server 198.6.1.1
clns routing
mpls traffic-eng tunnels
!

Tunnel configuration :
===============

!
interface Tunnel1
 description First tunnel to pass through the F10-box
 ip unnumbered Loopback11
 no ip directed-broadcast
 tunnel destination 21.21.21.1   # this is the ip addr of connected peer.
 tunnel mode mpls traffic-eng
 tunnel mpls traffic-eng priority 1 1
 tunnel mpls traffic-eng bandwidth 100
 tunnel mpls traffic-eng path-option 1 explicit identifier 1
!


physical interface configuration dump :
===========================
!
interface FastEthernet0/4
 ip address 21.21.21.3 255.255.255.0
 no ip directed-broadcast
 no ip mroute-cache
 mpls traffic-eng tunnels
 ip rsvp bandwidth 1000 1000
!

path configuration :
show ip explicit-paths identifier 1
PATH 1 (strict source route, path complete, generation 14)
    1: next-address 21.21.21.3


120008-1#show mpls traffic-eng tunnels Tunnel 1 

Name: First tunnel to pass through the... (Tunnel1) Destination: 21.21.21.1
  Status:
    Admin: up         Oper: down   Path: not valid   Signalling: Down
    path option 1, type explicit 1

  Config Paramters:
    Bandwidth:  100       Priority: 1  1   Affinity: 0x0/0xFFFF
    AutoRoute:  disabled  LockDown: disabled





-------
The MPLS-OPS Mailing List
Subscribe/Unsubscribe:  http://www.mplsrc.com/mplsops.shtml
Archive: http://www.mplsrc.com/mpls-ops_archive.shtml