The MPLS-OPS Archive

["Kent Yu" <yux@lucent.com>]

 Niels,

 If you are asking traffic driven LSP, there are many docs you could find
 from the web.
 Some vendors, as Ashwin mentioned Lucent IP Navigator in his reply, already
 integrated this feature.
 It is hard to imagine a instantly traffic-driven network can be useful in
 the real world, one of  the solutions probably is the LSR keeps track the
taffic state of the whole network, we give it a configurable time syntax so
 it will compute and setup LSPs upon each calculation periodically. The
network could be unstable and unpredictable, especially when you add the
 bypass and backup links. Probably we could get a decent optimization on the
 fly to some extend at some time, but this needs to verified and justified
in
 the real world.

 As for the MPLS to the desktop, I am not sure it is necessary, IMHO,
current
 IGPs are sufficient for enterprise users.

 Kent Yu
 Lucent Technologies Worldwide Services

> ----- Original Message -----
> From: "MP LS" <stagempls@hotmail.com>
> To: <MPLS@UU.NET>; <mpls-ops@mplsrc.com>
> Sent: Wednesday, April 25, 2001 8:29 AM
> Subject: MPLS Trafficdriven
>
>
> > Hello all,
> >
> > I have a question. Is there any possibile way to create a fully
dynamical
> > Traffic driven MPLS network. So that when any packet arives at an LSR it
> > will analyse the IP pakket ads a label in front of it with it combines
to
> a
> > FEC and then just sent it to the Destination LSR?  Just till now i only
> > found that you have to ask for an LSP manualy and then the data can be
> > transported over it.
> >
> > I hope someone can make this clear for me.
> >
> > Kind regards,
> >
> > Niels Sitters
> >
_________________________________________________________________________
> > Get Your Private, Free E-mail from MSN Hotmail at
http://www.hotmail.com.
>

-------
The MPLS-OPS Mailing List
Subscribe/Unsubscribe:  http://www.mplsrc.com/mplsops.shtml
Archive: http://www.mplsrc.com/mpls-ops_archive.shtml