The MPLS-OPS Archive

Cell Relay Retreat>MPLS-OPS Archive>month:2002-Aug> msg00091



[Date Prev][Date Next][Thread Prev][Thread Next]  
  [Date Index][Thread Index][Author Index][Subject Index]

RE: Problems with Redistribution EIGRP into BGP

  • From: Yinglam Cheung <rcheung@houston.sns.slb.com>
  • Date: Wed, 14 Aug 2002 13:18:55 -0500
  • Cc: "Vergara, Hugo" <Hugo.Vergara@getronics.com>, mpls-ops@mplsrc.com, "Salcedo, Martin" <Martin.Salcedo@getronics.com>, "Castaneda, Vicente" <Vicente.Castaneda@getronics.com>
  • Importance: Normal
  • Resent-Date: Wed, 14 Aug 2002 15:39:20 -0400
  • To: Ajay Simha <asimha@cisco.com>

The link the document referred to is broken:
http://www.cisco.com/univercd/cc//td/doc/product/software/ios120/120newft/12
0limit/120s/120s22/sei gpece.htm
I check the 12.0(22)S feature document and it doesn't list EIGRP.

best regards,
Yinglam (Raymond) Cheung
Double CCIE #6961
Senior Network Engineer
Schlumberger Network Infrastructure Solutions
Tel: 1 (713) 513-3285
Cell:1 (832) 274-0126

-----Original Message-----
From: Ajay Simha [mailto:asimha@cisco.com]
Sent: Wednesday, August 14, 2002 12:33 PM
To: Yinglam Cheung
Cc: Vergara, Hugo; mpls-ops@mplsrc.com; Salcedo, Martin; Castaneda,
Vicente
Subject: RE: [MPLS-OPS]: Problems with Redistribution EIGRP into BGP


On Wed, 14 Aug 2002, Yinglam Cheung wrote:

>YC:We have done this for quite a few large customers running EIGRP in their
>YC:networks.
>YC:You may want to check if there is any backdoor issues within customer
>YC:network. In some case, customer has a backdoor between two sites, and
the
>YC:backdoor is preferred over the MPLS network because the internal EIGRP
>YC:routes (AD: 90) is preferred over the external EIGRP routes (AD: 170)
>YC:redistributed from EBGP no matter what metric it is. You could adjust
this
>YC:on the CE.
>YC:Other issues are like asymetric routing. Customers may not get the paths
>YC:they like (not necessary the best path) especially when you have route
>YC:reflector in place in MPLS network. Of course you can customize  your
>YC:network design to meet customer needs.
>YC:One more thing you can check with Cisco is that, when they are going to
>YC:support EIGRP over PE-CE?

Yes it is supported in 12.0(22)S:

http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/relnote/7000
fam/rn120s.htm#xtocid12

-ajay
>YC:
>YC:best regards,
>YC:Yinglam (Raymond) Cheung
>YC:Double CCIE #6961
>YC:Senior Network Engineer
>YC:Schlumberger Network Infrastructure Solutions
>YC:Tel: 1 (713) 513-3285
>YC:Cell:1 (832) 274-0126
>YC:
>YC:-----Original Message-----
>YC:From: Vergara, Hugo [mailto:Hugo.Vergara@getronics.com]
>YC:Sent: Monday, August 12, 2002 2:49 PM
>YC:To: mpls-ops@mplsrc.com
>YC:Cc: Salcedo, Martin; Castaneda, Vicente
>YC:Subject: [MPLS-OPS]: Problems with Redistribution EIGRP into BGP
>YC:
>YC:
>YC:Hi Team,
>YC:
>YC:I have a Network Internal with EIGRP ( Cisco Equipment), My customer
wants
>YC:to connect to MPSL Network ( By Alestra AT&T), As you know only four
>YC:protocols could be used to connect to MPLS Network ( RIPv2, Static
Route,
>YC:OSPF and BGP ). Alestra said us that We used BGP.
>YC:
>YC:The topology is the next:
>YC:
>YC:
>YC:        ------------------------------------
>YC:                -----------                         -------------
>YC:/
>YC:
>YC:                 -----------------                   -------------------
----
>YC:-
>YC:               /           /                       /             /
>YC:/                                   /                   /
/
>YC:/                     /
>YC:	   /           / --------------------- /             /----------------
/
>YC:/------------------ /                /------------------ /
>YC:/
>YC:               /           /                       /             /
E-BGP
>YC:/                                   /   E-BGP      /                /
>YC:/                    /
>YC:                -----------                         -------------
>YC:/
>YC:
>YC:              ----------------                     ---------------------
>YC:
>YC:       -------------------------------------
>YC:
>YC:       EIGRP Network                        CE-1
>YC:MPLS Network	                        CE-2			EIGRP Network
>YC:								AT&T
>YC:
>YC:
>YC:We set E-BGP between CE and the MPLS Network, We have 15 CE around the
MPLS
>YC:Network.
>YC:The VPN´s  works fine, Beacuse all the CE´s look on the VPN. But some
routes
>YC:the router doesn´t updates in some routers.
>YC:
>YC:We redistribuit EIGRP into BGP, so we think that the problem is for
>YC:redistribution from EIGRP to BGP.....
>YC:
>YC:Do you have some example or tip ????
>YC:Did somebody have the same case or problem ?????
>YC:
>YC:
>YC:
>YC:Hugo Vergara Trejo
>YC:Network Engineer
>YC:Service Providers
>YC:
>YC:Getronics México
>YC:
>YC:-------
>YC:The MPLS-OPS Mailing List
>YC:Subscribe/Unsubscribe:  http://www.mplsrc.com/mplsops.shtml
>YC:Archive: http://www.mplsrc.com/mpls-ops_archive.shtml
>YC:
>YC:-------
>YC:The MPLS-OPS Mailing List
>YC:Subscribe/Unsubscribe:  http://www.mplsrc.com/mplsops.shtml
>YC:Archive: http://www.mplsrc.com/mpls-ops_archive.shtml
>YC:


-------
The MPLS-OPS Mailing List
Subscribe/Unsubscribe:  http://www.mplsrc.com/mplsops.shtml
Archive: http://www.mplsrc.com/mpls-ops_archive.shtml