The MPLS-OPS Archive

Cell Relay Retreat>MPLS-OPS Archive>month:2002-Jan> msg00051



[Date Prev][Date Next][Thread Prev][Thread Next]  
  [Date Index][Thread Index][Author Index][Subject Index]

RE: marconi configurations

  • From: "eric.allen@marconi.com" <eallen@pit.comms.marconi.com>
  • Date: Tue, 8 Jan 2002 16:41:12 -0800
  • Importance: Normal
  • Resent-Date: Tue, 8 Jan 2002 19:31:25 -0500
  • To: "Henry He" <qhe@io.iol.unh.edu>, <mpls-ops@mplsrc.com>

Hi Henry
Here is an example of creating and IP interface

k123.13:interfaces router atm-> new 1 3a4 -ipaddr 10.10.10.11 -mas
k 255.0.0.0 -nbraddr 10.10.10.12

To configure RSVP 
First enable RSVP
k123.13:signalling ip rsvp-> mod -state enabled

Then enable RSVP on the specified interface
k123.13:signalling ip rsvp interface-> new 10.10.10.11

Keep in mind RSVP Hellos are disabled by default


-----Original Message-----
From: Henry He [mailto:qhe@io.iol.unh.edu]
Sent: Tuesday, January 08, 2002 9:29 AM
To: mpls-ops@mplsrc.com
Subject: marconi configurations


hi, i'm new to marconi's asx200bx and am trying to figure out the
configurations for rsvp-te.  but as of now, i can't even configure an ip
address on some of the atm ports on the router.  i get the error message
"ERROR: modification failed: command failed".  and i used the command
"Marconi:-> interfaces ip modify -ifname 1C1 -ipaddr 10.10.10.11 -netmask
255.255.255.0".  any idea as to why there's error there?

thanks.  qhe@cisunix.unh.edu or qhe@iol.unh.edu


-Henry
 _   _  ____           _
| |_| || __/   /| /|  / ||\ ||  UNH - EE
|  _  || _/==//||/ | / /|||\||  IOL - IP
|_| |_||_/  // |/ ||/_/)|||\_|  603.862.0090

-------
The MPLS-OPS Mailing List
Subscribe/Unsubscribe:  http://www.mplsrc.com/mplsops.shtml
Archive: http://www.mplsrc.com/mpls-ops_archive.shtml


-------
The MPLS-OPS Mailing List
Subscribe/Unsubscribe:  http://www.mplsrc.com/mplsops.shtml
Archive: http://www.mplsrc.com/mpls-ops_archive.shtml