The MPLS-OPS Archive

["Joe Lin" <jlin@doradosoftware.com>]

It would help if you post the full config.

My guess is your not redistributing the static vrf routes into your
mgmt_vpn ?


-----Original Message-----
From: Ravichander Vaidyanathan [mailto:vravi@research.telcordia.com] 
Sent: Tuesday, July 23, 2002 11:45 AM
To: mpls-ops@mplsrc.com
Subject: [MPLS-OPS]: BGP MPLS Management VPN



I am in the process of a setting up a Management VPN for configuration
of
CE routers, and the mgt stations sit behind a VRF on a PE router. The
intent is to manage the PE and P routers as well from behind the VRF. I
attempted to set up some static routes from the VRF to the PE/P routers
and vice versa, but am unable to get connectivity, except to the
directly
attached PE router. Can anyone help me out with some sample
configuration?

My network looks like this:

    Mgt station -------PE -------P1---etc.


on the PE router:

ip route vrf MGT_VPN 0.0.0.0 0.0.0.0 Eth1/3 <P1 - IP address>
ip route <mgt_station> <mask> Eth2/0

! to redistribute the mgt station
!
router ospf X
 redistribute static subnets


thanks,
Ravi


-------
The MPLS-OPS Mailing List
Subscribe/Unsubscribe:  http://www.mplsrc.com/mplsops.shtml
Archive: http://www.mplsrc.com/mpls-ops_archive.shtml


-------
The MPLS-OPS Mailing List
Subscribe/Unsubscribe:  http://www.mplsrc.com/mplsops.shtml
Archive: http://www.mplsrc.com/mpls-ops_archive.shtml