The MPLS-OPS Archive

Cell Relay Retreat>MPLS-OPS Archive>month:2002-May> msg00143



[Date Prev][Date Next][Thread Prev][Thread Next]  
  [Date Index][Thread Index][Author Index][Subject Index]

Re: What does this error mean: tagsw_sendnet: failed:CoS=0, TTL=255, Tag(s)=100002

  • From: Ajay Simha <asimha@cisco.com>
  • Date: Sat, 18 May 2002 07:47:08 -0400 (EDT)
  • cc: mpls-ops@mplsrc.com
  • Resent-Date: Sat, 18 May 2002 08:48:24 -0400
  • To: Joe Lin <jlin@doradosoftware.com>

On Fri, 17 May 2002, Joe Lin wrote:

Joe Lin,

Is the problem still happening? If so could you please send me the output of
"show tech" on your box. Take the output only if you are still seeing the
problem.

Please unicast me and let us take this off the list. From what I gather this
could be due to the output interface not supporting MPLS or something like
that.

BTW this soft of thing is a prime candidate for opening a TAC case with Cisco
rather than this sort of list :)

-ajay
>JL:All,
>JL:
>JL:            On a cisco devices, I keep getting the below error with
>JL:debug on
>JL:
>JL:1d16h: TAG: Et0/4: tagsw_sendnet: failed: CoS=0, TTL=255, Tag(s)=100002
>JL:1d16h: TAG: Et0/4: tagsw_sendnet: CoS=0, TTL=255, Tag(s)=100002
>JL:1d16h: %SYS-5-CONFIG_I: Configured from console by vty2 (192.168.0.152)
>JL:1d16h: TAG: Et0/4: tagsw_sendnet: failed: CoS=0, TTL=255, Tag(s)=100002
>JL:1d16h: TAG: Et0/4: tagsw_sendnet: failed: CoS=0, TTL=255, Tag(s)=100002
>JL:1d16h: TAG: Et0/4: recvd: CoS=0, TTL=5, Tag(s)=27
>JL:1d16h: TAG: Et0/3: xmit: (no tag)
>JL:1d16h: TAG: Et0/4: recvd: CoS=0, TTL=5, Tag(s)=27
>JL:1d16h: TAG: Et0/3: xmit: (no tag)
>JL:1d16h: TAG: Et0/4: recvd: CoS=0, TTL=5, Tag(s)=27
>JL:1d16h: TAG: Et0/3: xmit: (no tag)
>JL:
>JL:What am I doing wrong?
>JL:
>JL:

-- 

-------
The MPLS-OPS Mailing List
Subscribe/Unsubscribe:  http://www.mplsrc.com/mplsops.shtml
Archive: http://www.mplsrc.com/mpls-ops_archive.shtml