The MPLS-OPS Archive

Cell Relay Retreat>MPLS-OPS Archive>month:2002-May> msg00197



[Date Prev][Date Next][Thread Prev][Thread Next]  
  [Date Index][Thread Index][Author Index][Subject Index]

RE: LER options

  • From: "Zeevik Neuman" <zeevikn@seriqa.com>
  • Date: Sun, 26 May 2002 11:32:38 +0200
  • Resent-Date: Sun, 26 May 2002 05:33:05 -0400
  • Thread-Index: AcIBwAlvr7uX6eQYToyPP+VUKGar2AC2H6pA
  • Thread-Topic: [MPLS-OPS]: LER options
  • To: "Roger Clark Williams" <rogerw@nordlink.com>, <mpls-ops@mplsrc.com>, "Gustavo Wymerszberg" <gustavow@nortelnetworks.com>

I'm using in my lab the Cisco 2600 to run MPLS Traffic Engineering, and it works OK.
I did just simple tests, like reserving MPLS-TE tunnels using RSVP and IS-IS, and it works OK.
The version is 12.2(2)T.
C2600 Software (C2600-TELCO-M), Version 12.2(8)T1
c2600-telco-mz.122-8.T1.bin.
 
 
 
-----Original Message-----
From: Roger Clark Williams [mailto:rogerw@nordlink.com]
Sent: Wednesday, May 22, 2002 18:47
To: mpls-ops@mplsrc.com
Subject: Re: [MPLS-OPS]: LER options

Gustavo, the answer is "yes". The image I use is:c2600-telco-mz.122-2.T.bin; may not be the best but it seems to support most functions. Zeevik wrote that perhaps it didn't, so you can write him and ask: "Zeevik Neuman" <zeevikn@seriqa.com>. Others may have comments too.

Roger Williams

At 08:55 AM 5/22/2002, you wrote:

Folks,
Can I use a Cisco 2600 as a PE in a lab environment ? I mean, I'm trying to use a small Cisco router working as a PE device in a MPLS-VPN testing.

Just in case the answer was yes, which is the IOS that I would need ? (release and feature set)

thanks in advance

Gustavo Wymerszberg
------- The MPLS-OPS Mailing List Subscribe/Unsubscribe: http://www.mplsrc.com/mplsops.shtml Archive: http://www.mplsrc.com/mpls-ops_archive.shtml