The MPLS-OPS Archive

Cell Relay Retreat>MPLS-OPS Archive>month:2002-Nov> msg00033



[Date Prev][Date Next][Thread Prev][Thread Next]  
  [Date Index][Thread Index][Author Index][Subject Index]

Re: MPLS/VPLS Vendors

  • From: Helen Butcher <hbutcher@genuity.com>
  • Date: Fri, 15 Nov 2002 12:05:36 -0500
  • Cc: mpls-ops@mplsrc.com
  • Resent-Date: Fri, 15 Nov 2002 13:47:03 -0500
  • To: Yakov Rekhter <yakov@juniper.net>
  • X-Sender: hbutcher@pobox3.genuity.com

Yakov,

Does Juniper have plan to support draft-Martini-transport over Frame
and ATM?

Helen.

At 06:27 AM 11/15/2002 -0800, Yakov Rekhter wrote:
> > they support both...
> >
> > LDP(martini) and RSVP (kompella)
>
>To be precise, at the present moment Juniper supports both
>draft-kompella-ppvpn-l2vpn and draft-martini (both LDP signaling
>and encapsulation).  With respect to establishing PE-PE LSPs (which
>is somewhat orthogonal to the question of supporting Layer 2 VPNs)
>Juniper supports both LDP and RSVP.
>
>Yakov.
> >
> >   ----- Original Message -----
> >   From: JACK RODRIGUEZ
> >   To: peter.doten@terayon.com ; Moshe.Aharon@lightscapenet.com ;
> > mpls-ops@mplsrc.com
> >   Sent: Friday, November 15, 2002 12:47 AM
> >   Subject: RE: [MPLS-OPS]: MPLS/VPLS Vendors
> >
> >
> >
> >
> >
> >
> >   I thought that Juniper (MXX boxes) was basing their layer 2 
> implementation
> > on ID draft-kompella-ppvpn-l2vpn
> >
> >   -Jack
> >
> >   >From: "Doten, Peter"
> >   >To: "'Moshe.Aharon@lightscapenet.com '" , "'mpls-ops@mplsrc.com '"
> >   >Subject: RE: [MPLS-OPS]: MPLS/VPLS Vendors
> >   >Date: Thu, 14 Nov 2002 08:29:33 -0800
> >   >
> >   > Juniper has a nice L2 solution using the martini draft. Riverstone has
> > one
> >   >as well.
> >   >
> >   >Peter
> >   >
> >   >-----Original Message-----
> >   >From: Moshe.Aharon@lightscapenet.com
> >   >To: mpls-ops@mplsrc.com
> >   >Sent: 11/14/2002 7:23 AM
> >   >Subject: [MPLS-OPS]: MPLS/VPLS Vendors
> >   >
> >   >Hi all,
> >   >
> >   >I'm in the process of evaluating MPLS (for implementing a L2 MPLS/VPLS
> >   >Switch) Hw and Sw vendors and integrated solutions.
> >   >I'm especially looking for integrated ASICs or Mature NPs (with the
> >   >right
> >   >software) to implement a L2 VPN solution.
> >   >
> >   >Can anyone share his experience in implementing VPLS solutions?
> >   >Can you help with a list of recommended Hw/Sw vendors?
> >   >
> >   >
> >   >Thanks a lot!
> >   >Moshe
> >   >
> >   >-------
> >   >The MPLS-OPS Mailing List
> >   >Subscribe/Unsubscribe: http://www.mplsrc.com/mplsops.shtml
> >   >Archive: http://www.mplsrc.com/mpls-ops_archive.shtml
> >   >
> >   >-------
> >   >The MPLS-OPS Mailing List
> >   >Subscribe/Unsubscribe: http://www.mplsrc.com/mplsops.shtml
> >   >Archive: http://www.mplsrc.com/mpls-ops_archive.shtml
> >
> >
> > 
> ----------------------------------------------------------------------------
> > --
> >   Protect your PC - Click here for McAfee.com VirusScan Online ------- The
> > MPLS-OPS Mailing List Subscribe/Unsubscribe:
> > http://www.mplsrc.com/mplsops.shtml Archive:
> > http://www.mplsrc.com/mpls-ops_archive.shtml
> >
> > ------=_NextPart_000_000E_01C28C95.B609B360
> > Content-Type: text/html;
> >       charset="iso-8859-1"
> > Content-Transfer-Encoding: quoted-printable
> >
> > <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
> > <HTML><HEAD>
> > <META content=3D"text/html; charset=3Diso-8859-1" =
> > http-equiv=3DContent-Type>
> > <META content=3D"MSHTML 5.00.2919.6307" name=3DGENERATOR>
><STYLE></STYLE>
> > </HEAD>
> > <BODY bgColor=3D#ffffff>
> > <DIV><FONT face=3DArial size=3D2>they support both...</FONT></DIV>
> > <DIV>&nbsp;</DIV>
> > <DIV><FONT face=3DArial size=3D2>LDP(martini) and RSVP =
> > (kompella)</FONT></DIV>
> > <DIV>&nbsp;</DIV>
> > <BLOCKQUOTE=20
> > style=3D"BORDER-LEFT: #000000 2px solid; MARGIN-LEFT: 5px; MARGIN-RIGHT: =
> > 0px; PADDING-LEFT: 5px; PADDING-RIGHT: 0px">
> >   <DIV style=3D"FONT: 10pt arial">----- Original Message ----- </DIV>
> >   <DIV=20
> >   style=3D"BACKGROUND: #e4e4e4; FONT: 10pt arial; font-color: =
>black"><B>From:</B>=20
> >   <A href=3D"mailto:jack_r33@hotmail.com" =
> > title=3Djack_r33@hotmail.com>JACK=20
> >   RODRIGUEZ</A> </DIV>
> >   <DIV style=3D"FONT: 10pt arial"><B>To:</B> <A=20
> >   href=3D"mailto:peter.doten@terayon.com"=20
> >   title=3Dpeter.doten@terayon.com>peter.doten@terayon.com</A> ; <A=20
> >   href=3D"mailto:Moshe.Aharon@lightscapenet.com"=20
> >   =
> > title=3DMoshe.Aharon@lightscapenet.com>Moshe.Aharon@lightscapenet.com</A>=
> >  ; <A=20
> >   href=3D"mailto:mpls-ops@mplsrc.com"=20
> >   title=3Dmpls-ops@mplsrc.com>mpls-ops@mplsrc.com</A> </DIV>
> >   <DIV style=3D"FONT: 10pt arial"><B>Sent:</B> Friday, November 15, 2002 =
> > 12:47=20
> >   AM</DIV>
> >   <DIV style=3D"FONT: 10pt arial"><B>Subject:</B> RE: [MPLS-OPS]: =
> > MPLS/VPLS=20
> >   Vendors</DIV>
> >   <DIV><BR></DIV>
> >   <DIV>
> >   <DIV>
> >   <P><BR><BR></P>
> >   <DIV>
> >   <DIV></DIV>
> >   <P>I&nbsp;thought that Juniper (MXX boxes)&nbsp;was basing their layer =
> > 2=20
> >   implementation on ID =
> > draft-kompella-ppvpn-l2vpn<BR><BR>-Jack</P></DIV></DIV>
> >   <DIV></DIV>
> >   <DIV></DIV>
> >   <DIV></DIV>&gt;From: "Doten, Peter" <PETER.DOTEN@TERAYON.COM>
> >   <DIV></DIV>
> >   <DIV></DIV>&gt;To: "<A=20
> >   =
> > href=3D"mailto:'Moshe.Aharon@lightscapenet.com">'Moshe.Aharon@lightscapen=
> > et.com</A>=20
> >   '" <MOSHE.AHARON@LIGHTSCAPENET.COM>, "<A=20
> >   href=3D"mailto:'mpls-ops@mplsrc.com">'mpls-ops@mplsrc.com</A> '"=20
> >   <MPLS-OPS@MPLSRC.COM>
> >   <DIV></DIV>
> >   <DIV></DIV>&gt;Subject: RE: [MPLS-OPS]: MPLS/VPLS Vendors=20
> >   <DIV></DIV>
> >   <DIV></DIV>&gt;Date: Thu, 14 Nov 2002 08:29:33 -0800=20
> >   <DIV></DIV>
> >   <DIV></DIV>&gt;=20
> >   <DIV></DIV>
> >   <DIV></DIV>&gt; Juniper has a nice L2 solution using the martini =
> > draft.=20
> >   Riverstone has one=20
> >   <DIV></DIV>
> >   <DIV></DIV>&gt;as well.=20
> >   <DIV></DIV>
> >   <DIV></DIV>&gt;=20
> >   <DIV></DIV>
> >   <DIV></DIV>&gt;Peter=20
> >   <DIV></DIV>
> >   <DIV></DIV>&gt;=20
> >   <DIV></DIV>
> >   <DIV></DIV>&gt;-----Original Message-----=20
> >   <DIV></DIV>
> >   <DIV></DIV>&gt;From: <A=20
> >   =
> > href=3D"mailto:Moshe.Aharon@lightscapenet.com">Moshe.Aharon@lightscapenet=
> > .com</A>=20
> >
> >   <DIV></DIV>
> >   <DIV></DIV>&gt;To: <A=20
> >   href=3D"mailto:mpls-ops@mplsrc.com">mpls-ops@mplsrc.com</A>=20
> >   <DIV></DIV>
> >   <DIV></DIV>&gt;Sent: 11/14/2002 7:23 AM=20
> >   <DIV></DIV>
> >   <DIV></DIV>&gt;Subject: [MPLS-OPS]: MPLS/VPLS Vendors=20
> >   <DIV></DIV>
> >   <DIV></DIV>&gt;=20
> >   <DIV></DIV>
> >   <DIV></DIV>&gt;Hi all,=20
> >   <DIV></DIV>
> >   <DIV></DIV>&gt;=20
> >   <DIV></DIV>
> >   <DIV></DIV>&gt;I'm in the process of evaluating MPLS (for implementing =
> > a L2=20
> >   MPLS/VPLS=20
> >   <DIV></DIV>
> >   <DIV></DIV>&gt;Switch) Hw and Sw vendors and integrated solutions.=20
> >   <DIV></DIV>
> >   <DIV></DIV>&gt;I'm especially looking for integrated ASICs or Mature =
> > NPs (with=20
> >   the=20
> >   <DIV></DIV>
> >   <DIV></DIV>&gt;right=20
> >   <DIV></DIV>
> >   <DIV></DIV>&gt;software) to implement a L2 VPN solution.=20
> >   <DIV></DIV>
> >   <DIV></DIV>&gt;=20
> >   <DIV></DIV>
> >   <DIV></DIV>&gt;Can anyone share his experience in implementing VPLS =
> > solutions?=20
> >
> >   <DIV></DIV>
> >   <DIV></DIV>&gt;Can you help with a list of recommended Hw/Sw vendors?=20
> >   <DIV></DIV>
> >   <DIV></DIV>&gt;=20
> >   <DIV></DIV>
> >   <DIV></DIV>&gt;=20
> >   <DIV></DIV>
> >   <DIV></DIV>&gt;Thanks a lot!=20
> >   <DIV></DIV>
> >   <DIV></DIV>&gt;Moshe=20
> >   <DIV></DIV>
> >   <DIV></DIV>&gt;=20
> >   <DIV></DIV>
> >   <DIV></DIV>&gt;-------=20
> >   <DIV></DIV>
> >   <DIV></DIV>&gt;The MPLS-OPS Mailing List=20
> >   <DIV></DIV>
> >   <DIV></DIV>&gt;Subscribe/Unsubscribe: =
> > http://www.mplsrc.com/mplsops.shtml=20
> >   <DIV></DIV>
> >   <DIV></DIV>&gt;Archive: http://www.mplsrc.com/mpls-ops_archive.shtml=20
> >   <DIV></DIV>
> >   <DIV></DIV>&gt;=20
> >   <DIV></DIV>
> >   <DIV></DIV>&gt;-------=20
> >   <DIV></DIV>
> >   <DIV></DIV>&gt;The MPLS-OPS Mailing List=20
> >   <DIV></DIV>
> >   <DIV></DIV>&gt;Subscribe/Unsubscribe: =
> > http://www.mplsrc.com/mplsops.shtml=20
> >   <DIV></DIV>
> >   <DIV></DIV>&gt;Archive: http://www.mplsrc.com/mpls-ops_archive.shtml=20
> >   <DIV></DIV>
> >   <DIV></DIV>
> >   <DIV></DIV></DIV><BR clear=3Dall>
> >   <HR>
> >   Protect your PC - <A href=3D"http://g.msn.com/8HMFEN/2024">Click =
> > here</A> for=20
> >   McAfee.com VirusScan Online ------- The MPLS-OPS Mailing List=20
> >   Subscribe/Unsubscribe: http://www.mplsrc.com/mplsops.shtml Archive:=20
> >   http://www.mplsrc.com/mpls-ops_archive.shtml =
> > </BLOCKQUOTE></BODY></HTML>
> >
> > ------=_NextPart_000_000E_01C28C95.B609B360--
> >
> > -------
> > The MPLS-OPS Mailing List
> > Subscribe/Unsubscribe:  http://www.mplsrc.com/mplsops.shtml
> > Archive: http://www.mplsrc.com/mpls-ops_archive.shtml
>
>-------
>The MPLS-OPS Mailing List
>Subscribe/Unsubscribe:  http://www.mplsrc.com/mplsops.shtml
>Archive: http://www.mplsrc.com/mpls-ops_archive.shtml

-------
The MPLS-OPS Mailing List
Subscribe/Unsubscribe:  http://www.mplsrc.com/mplsops.shtml
Archive: http://www.mplsrc.com/mpls-ops_archive.shtml