The MPLS-OPS Archive

[Date Prev][Date Next][Thread Prev][Thread Next]
[Date Index][Thread Index][Author Index][Subject Index]

Re: Cisco VPN Solution Center

From: "JAVI.PLL" <JAVI.PLL@terra.es>
Date: Wed, 11 Sep 2002 17:06:37 +0200
Cc: mpls-ops@mplsrc.com
Resent-Date: Wed, 11 Sep 2002 12:37:52 -0400
To: Ross Chandler <ross@eircom.net>

The main objective of VPN-SC for MPLS (there is another part for 
IPSec) is provisioning over an existing MPLS network running.

  VPN-SC provides some additional tools can be used for configure PE, 
but this has to be understood as manual mode, that is, out of any 
automatic procedure and with no "logical reflect" in the database, 
related with the customer VPN itself.

  Regards

  JAVI

  
----- Mensaje Original -----
De: Ross Chandler <ross@eircom.net>
Fecha: Miercoles, Septiembre 11, 2002 3:16 pm
Asunto: Re: [MPLS-OPS]: Cisco VPN Solution Center

> >Hi everyone,
> >
> >
> >
> >I'm running test on Cisco VPNSC. I was able to properly configure 
> PE 
> >and CE configurations for the VPN (vrf, rd, routing protocol PE-
> CE). 
> >What couldn't configure using the VPNSC was MP-IBGP peers between 
> >several PEs.
> >
> >
> >
> >Does anyone know how to do it on the VPNSC? Is it possible to do 
> it 
> >on the VPNSC? I'm using version 2.1.
> >
> >
> 
> That isn't part of VPNSC's normal operations.
> You could try templating it however. It isn't like a PE-CE service 
> request.If you use route reflectors for the MP-iBGP it will scale 
> better and
> the desire to template it will be reduced.
> 
> Regards
> 
> Ross
> 
> 


-------
The MPLS-OPS Mailing List
Subscribe/Unsubscribe:  http://www.mplsrc.com/mplsops.shtml
Archive: http://www.mplsrc.com/mpls-ops_archive.shtml