The MPLS-OPS Archive

Cell Relay Retreat>MPLS-OPS Archive>month:2003-Jul> msg00101



[Date Prev][Date Next][Thread Prev][Thread Next]  
  [Date Index][Thread Index][Author Index][Subject Index]

RE: RSVP LSP without CSPF?

  • From: Terry Lee <terrylee@huawei.com>
  • Date: Mon, 28 Jul 2003 12:46:47 +0800
  • Cc: mpls-ops@mplsrc.com
  • Importance: Normal
  • Resent-Date: Mon, 28 Jul 2003 01:10:31 -0400
  • To: "'Lars Higham'" <lhigham@yahoo.com>, carlos@carlos.net, richard.james@rogers.com

which version does cisco support it ?
 why cisco router as an ingress doesn't send path message ?



Thanks and Regards,
Terry Lee

> -----Original Message-----
> From: Lars Higham [mailto:lhigham@yahoo.com] 
> Sent: Monday, July 28, 2003 12:27 PM
> To: 'Terry Lee'; carlos@carlos.net; richard.james@rogers.com
> Cc: mpls-ops@mplsrc.com
> Subject: RE: [MPLS-OPS]: RSVP LSP without CSPF?
> 
> 
> You are correct - no CSPF, no TED requirement -
> 
> Regards,
> Lars
> 
> -----Original Message-----
> From: Terry Lee [mailto:terrylee@huawei.com] 
> Sent: Monday, July 28, 2003 6:44 AM
> To: carlos@carlos.net; richard.james@rogers.com
> Cc: mpls-ops@mplsrc.com
> Subject: RE: [MPLS-OPS]: RSVP LSP without CSPF?
> 
> 
> Hi
> If it works without cspf, I think ospt-te isn't needed in 
> this case.  am I right?  
> 
> 
> 
> 
> Thanks and Regards,
> Terry Lee
> 
> > -----Original Message-----
> > From: carlos@carlos.net [mailto:carlos@carlos.net]
> > Sent: Saturday, July 26, 2003 8:58 AM
> > To: richard.james@rogers.com
> > Cc: mpls-ops@mplsrc.com
> > Subject: Re: [MPLS-OPS]: RSVP LSP without CSPF?
> > 
> > 
> > On Fri, 25 Jul 2003 17:22:20 -0400,
> > richard.james@rogers.com wrote:
> > 
> > cisco has an option "verbatim" , juniper and others
> > support it with "no-cspf"
> > 
> > thx
> > 
> > carlos
> > 
> > > 
> > > Hi,
> > > Is it possible to configure an RSVP tunnel with IOS so
> > > that it doesn't run CSPF, but only uses the
> > > strict/loose path? This is when you want to ignore bandwidth and
> > > color constraints and only use the ERO
> > to
> > > compute the path.
> > > 
> > > I haven't been able to find an option for this in the
> > > docs, but if it's there I'd appreciate if someone
> > could
> > > point me to the command name.
> > > 
> > > Thanks,
> > > Richard
> > > 
> > > 1
> > > 
> > > -------
> > > The MPLS-OPS Mailing List
> > > Subscribe/Unsubscribe:
> > > http://www.mplsrc.com/mplsops.shtml
> > > Archive: http://www.mplsrc.com/mpls-ops_archive.shtml
> > 
> > -------
> > The MPLS-OPS Mailing List
> > Subscribe/Unsubscribe:  http://www.mplsrc.com/mplsops.shtml
> > Archive: http://www.mplsrc.com/mpls-ops_archive.shtml
> > 
> 
> -------
> The MPLS-OPS Mailing List
> Subscribe/Unsubscribe:  http://www.mplsrc.com/mplsops.shtml
> Archive: http://www.mplsrc.com/mpls-ops_archive.shtml
> 
> -------
> The MPLS-OPS Mailing List
> Subscribe/Unsubscribe:  http://www.mplsrc.com/mplsops.shtml
> Archive: http://www.mplsrc.com/mpls-ops_archive.shtml
> 

-------
The MPLS-OPS Mailing List
Subscribe/Unsubscribe:  http://www.mplsrc.com/mplsops.shtml
Archive: http://www.mplsrc.com/mpls-ops_archive.shtml