The MPLS-OPS Archive[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index][Thread Index][Author Index][Subject Index] Re: Re: Advertising Routes learnt from PE to PE
Steinar, In your design, are you feeding the spoke's a default route/summary? The below hub config (alone) will not readvertise to SpokeB prefix's learnt from SpokeA. On 5/15/03 4:08 PM, "sthaug@nethelp.no" <sthaug@nethelp.no> wrote: >> You do use "hub and spoke"? > > We use hub and spoke for a few customers that have specifically > requested it. Most customers have a full mesh configuration. > >> Care to share with us the "show running-config" so that we can all deploy it >> too? > > Nothing magic about it. An extract from the config on a hub: > > ip vrf V80:Customer_A > rd 64567:179 > route-target export 64567:115 > route-target import 64567:115 > route-target import 64567:116 > > interface FastEthernet3/0.16 > encapsulation dot1Q 16 > ip vrf forwarding V80:CustomerA > ip address 10.116.32.2 255.255.248.0 > > and from a spoke: > > ip vrf V69:Customer_A-s > rd 64567:168 > route-target export 64567:116 > route-target import 64567:115 > > interface FastEthernet1/0.3 > encapsulation dot1Q 3 > ip vrf forwarding V77:CustomerA-s > ip address 10.116.50.1 255.255.255.0 > > Steinar Haug, BaneTele > > ------- > The MPLS-OPS Mailing List > Subscribe/Unsubscribe: http://www.mplsrc.com/mplsops.shtml > Archive: http://www.mplsrc.com/mpls-ops_archive.shtml -- Aamer Akhter / aa@cisco.com NSITE - cisco Systems ------- The MPLS-OPS Mailing List Subscribe/Unsubscribe: http://www.mplsrc.com/mplsops.shtml Archive: http://www.mplsrc.com/mpls-ops_archive.shtml
|
|