The MPLS-OPS Archive[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index][Thread Index][Author Index][Subject Index] RE: Cisco AToM: Frame Relay and ATM QoS.
Tero, What platform are you using? I'm contacting the documentation folks to have the link fix. Don't quite understand your second question. Do you mean mapping between FR DE and MPLS EXP? Yes, that is possible. You have total flexibility to define mapping using the 'set' command or via the policer. There are some restrictions depending on the platform though. Cheers. SA -- > -----Original Message----- > From: Kilkanen Tero EC [mailto:Tero.Kilkanen@elisa.fi] > Sent: Friday, September 19, 2003 6:03 AM > To: mpls-ops@mplsrc.com > Subject: [MPLS-OPS]: Cisco AToM: Frame Relay and ATM QoS. > > > Hello, > > I am trying to find information on FR and ATM QoS with MPLS > AToM. I've found this webpage: > http://www.cisco.com/en/US/products/sw/iosswrel/ps1839/products_feature_guid e_chapter09186a0080153e67.html However, the information on this web page is not too complete. For example, in the ATM QoS example, there is a class-map configured, but there is no match statements entered in the class-map. What should be used in the class-map? My second question, is the status for FR QoS still the same as mentioned in the overview document? So that one can just set the EXP field for all the tunneled FR frames, independent of the QoS bits that FR frames contain? Thanks, - Tero --- Tero Kilkanen Researcher Elisa Oyj Elisa Research Tel: +358 10 2627144, Fax: +358 10 2628487 GSM: +358 50 5315045 Tero.Kilkanen@elisa.fi ------- The MPLS-OPS Mailing List Subscribe/Unsubscribe: http://www.mplsrc.com/mplsops.shtml Archive: http://www.mplsrc.com/mpls-ops_archive.shtml ------- The MPLS-OPS Mailing List Subscribe/Unsubscribe: http://www.mplsrc.com/mplsops.shtml Archive: http://www.mplsrc.com/mpls-ops_archive.shtml
|
|