The MPLS-OPS Archive

Cell Relay Retreat>MPLS-OPS Archive>month:2004-Aug> msg00161



[Date Prev][Date Next][Thread Prev][Thread Next]  
  [Date Index][Thread Index][Author Index][Subject Index]

RE: Load sharing across LSPs on Juniper hardware

  • From: "Khan, Amjad" <akhan@flagtelecom.com>
  • Date: Thu, 26 Aug 2004 07:16:28 +0100
  • Resent-Date: Thu, 26 Aug 2004 02:43:13 -0400
  • To: "'Palmer, Rob A'" <Rob.Palmer@team.telstra.com>, mpls-ops@mplsrc.com
  • X-Scanned-By: MailControl A-05-00-00 (www.mailcontrol.com)

If you have parallel LSPs b/w same ingrees-egress addresses then, traffic
should be automatically shared among the LSPs, IGP metric will be used to
loadbalance for all the LSPs
If there is no IGP then, same static metric could be defined for all these
parallel LSPs? 

Amjad

-----Original Message-----
From: Palmer, Rob A [mailto:Rob.Palmer@team.telstra.com]
Sent: 26 August 2004 07:03
To: mpls-ops@mplsrc.com
Subject: [MPLS-OPS]: Load sharing across LSPs on Juniper hardware



Does anyone know how to configure a Juniper router to do per-prefix load
balancing across LSPS between the same source and destination? I have tried
reading the documentation but it is very un-enlightening. 
Some example config would be helpful.

thanks,
Rob

-------
The MPLS-OPS Mailing List
Subscribe/Unsubscribe:  http://www.mplsrc.com/mplsops.shtml
Archive: http://www.mplsrc.com/mpls-ops_archive.shtml


**********************************************************************
This e-mail message is confidential and is intended only for the use of the
individual or entity named above and contains information which is or may be
confidential, non-public or legally privileged. Any dissemination or
distribution of this message other than to its intended recipient is
strictly prohibited. You should not copy it or use it for any purpose nor disclose 
the contents to any other person. If you have received this message in error, please
notify us by email to postmaster@flagtelecom.com immediately and delete the
original message and all copies from all locations in your computer systems.


This e-mail has been swept by Mailsweeper TM for viruses. However, FLAG
Telecom cannot accept liability for any damage which you may sustain as a
result of software viruses.
**********************************************************************

  



This message has been scanned for viruses by MailControl - www.mailcontrol.com

-------
The MPLS-OPS Mailing List
Subscribe/Unsubscribe:  http://www.mplsrc.com/mplsops.shtml
Archive: http://www.mplsrc.com/mpls-ops_archive.shtml