The MPLS-OPS Archive

["Gupta, Shailendra" <Shailendra.Gupta@hk.mci.com>]

Title: RE: [MPLS-OPS]: Load sharing across LSPs on Juniper hardware

Amjad

It seems that you r referring "per-interface" MPLS Ranges case[Like ATM ], as in case of "per-platform/global there will be only one LSP for one Prefix. I am not sure if Juniper follow some different standard.

I guess so.....

Shail

-----Original Message-----
From: Khan, Amjad [mailto:akhan@flagtelecom.com]
Sent: Thursday, August 26, 2004 11:46 AM
To: 'Palmer, Rob A'; mpls-ops@mplsrc.com
Subject: RE: [MPLS-OPS]: Load sharing across LSPs on Juniper hardware

Precedence: list
Resent-Sender: mpls-ops-request@mplsrc.com

If you have parallel LSPs b/w same ingrees-egress addresses then, traffic should be automatically shared among the LSPs, IGP metric will be used to loadbalance for all the LSPs If there is no IGP then, same static metric could be defined for all these parallel LSPs?

Amjad

-----Original Message-----
From: Palmer, Rob A [mailto:Rob.Palmer@team.telstra.com]
Sent: 26 August 2004 07:03
To: mpls-ops@mplsrc.com
Subject: [MPLS-OPS]: Load sharing across LSPs on Juniper hardware

Does anyone know how to configure a Juniper router to do per-prefix load balancing across LSPS between the same source and destination? I have tried reading the documentation but it is very un-enlightening.

Some example config would be helpful.

thanks,
Rob

-------
The MPLS-OPS Mailing List
Subscribe/Unsubscribe:  http://www.mplsrc.com/mplsops.shtml
Archive: http://www.mplsrc.com/mpls-ops_archive.shtml

**********************************************************************
This e-mail message is confidential and is intended only for the use of the individual or entity named above and contains information which is or may be confidential, non-public or legally privileged. Any dissemination or distribution of this message other than to its intended recipient is strictly prohibited. You should not copy it or use it for any purpose nor disclose

the contents to any other person. If you have received this message in error, please notify us by email to postmaster@flagtelecom.com immediately and delete the original message and all copies from all locations in your computer systems.

This e-mail has been swept by Mailsweeper TM for viruses. However, FLAG Telecom cannot accept liability for any damage which you may sustain as a result of software viruses.

**********************************************************************

 

This message has been scanned for viruses by MailControl - www.mailcontrol.com

-------
The MPLS-OPS Mailing List
Subscribe/Unsubscribe:  http://www.mplsrc.com/mplsops.shtml
Archive: http://www.mplsrc.com/mpls-ops_archive.shtml