The MPLS-OPS Archive

Cell Relay Retreat>MPLS-OPS Archive>month:2004-Aug> msg00167



[Date Prev][Date Next][Thread Prev][Thread Next]  
  [Date Index][Thread Index][Author Index][Subject Index]

RE: Load sharing across LSPs on Juniper hardware

  • From: "Clark, Anthony" <anthony.clark@frontiercorp.com>
  • Date: Thu, 26 Aug 2004 08:51:31 -0400
  • Cc: "Peters, John" <john.peters@frontiercorp.com>
  • Resent-Date: Thu, 26 Aug 2004 09:25:39 -0400
  • Thread-Index: AcSLGUJpVBqjQUYdTDGGDDhpSX7qSgAUh5OA
  • Thread-Topic: Load sharing across LSPs on Juniper hardware
  • To: "Palmer, Rob A" <Rob.Palmer@team.telstra.com>, <mpls-ops@mplsrc.com>
  • X-MIME-Autoconverted: from quoted-printable to 8bit by host.secure4-hosting.net id i7QCq5QR032092
  • X-OriginalArrivalTime: 26 Aug 2004 12:51:27.0289 (UTC) FILETIME=[66A24A90:01C48B6B]

routing-options {
    router-id 192.168.0.2;
    autonomous-system 5650;
    forwarding-table {
        export LB;
    }

}
policy-options {
    policy-statement LB {
        then {
            load-balance per-packet;
        }
    }

-----Original Message-----
From: Clark, Anthony 
Sent: Thursday, August 26, 2004 8:40 AM
To: Peters, John
Subject: FW: [MPLS-OPS]: Load sharing across LSPs on Juniper hardware

-----Original Message-----
From: Palmer, Rob A [mailto:Rob.Palmer@team.telstra.com]
Sent: Wednesday, August 25, 2004 11:03 PM
To: mpls-ops@mplsrc.com
Subject: [MPLS-OPS]: Load sharing across LSPs on Juniper hardware



Does anyone know how to configure a Juniper router to do per-prefix load balancing across LSPS between the same source and destination? I have tried reading the documentation but it is very un-enlightening. 
Some example config would be helpful.

thanks,
Rob

-------
The MPLS-OPS Mailing List
Subscribe/Unsubscribe:  http://www.mplsrc.com/mplsops.shtml
Archive: http://www.mplsrc.com/mpls-ops_archive.shtml

-------
The MPLS-OPS Mailing List
Subscribe/Unsubscribe:  http://www.mplsrc.com/mplsops.shtml
Archive: http://www.mplsrc.com/mpls-ops_archive.shtml