The MPLS-OPS Archive[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index][Thread Index][Author Index][Subject Index] MPLS Load Balance
We are interested on testing Cisco routers capabilities for load balance in
MPLS VPN L3, and AToM environments. At this moment the only information we
have is:
MPLS Load Balance:
If the packet has three labels or less and the underlying packet is IPv4
("I guess that ipv4 packet are identified checking if the first 4 bits
following bottom label are 0100, i.e. the Version field of an IP header
with value 4") , then router uses the source and destination IPv4 address.
If the underlying packet is not IPv4 or more than three labels are present,
the router parses down as deep as the fifth or lowest label and uses it for
hashing. The maximum number of load sharing path is 16.
AToM Load Balancing :
By default most AToM modes use a similar load balancing mechanism to
determine the tunnel label for the core facing interface: the router
distributes AToM VCs across all available paths, irrespective of each
link's load. The router hashes the VC label into an index value that is
used to select a tunnel label. The selected tunnel label is placed on the
top of the label stack of a particular VC.
There is no load balancing at the tunnel ingress (entendido como el PE
Ingress); only one Interior Gateway Protocol (IGP) path is selected even if
multiple IGP paths are available. However, load balancing is available at
the MPLS core .
¿Is this information correct?
¿Is this information complete?
¿Applies to all cisco routers or different platforms behave in different
manners?.
¿Any lab or real experience about load balance with MPLS traffic (L3 VPN,
AToM)?
______________________________________________________________________________________
Este e-mail y cualquiera de sus ficheros anexos son confidenciales y pueden
incluir información privilegiada. Si usted no es el destinatario adecuado
(o responsable de remitirlo a la persona indicada), agradeceríamos lo
notificase/reenviase inmediatamente al emisor. No revele estos contenidos a
ninguna otra persona, no los utilice para otra finalidad, ni almacene y/o
copie esta información en medio alguno. Opiniones, conclusiones y otro tipo
de información relacionada con este mensaje que no sean relativas a la
actividad propia de RETEVISIÓN MOVIL S.A. (AMENA), deberán ser entendidas
exclusivas del emisor
Este e-mail y cualquiera de sus ficheros anexos son confidenciales y pueden incluir información privilegiada. Si usted no es el destinatario adecuado (o responsable de remitirlo a la persona indicada), agradeceríamos lo notificase/reenviase inmediatamente al emisor. No revele estos contenidos a ninguna otra persona, no los utilice para otra finalidad, ni almacene y/o copie esta información en medio alguno. Opiniones, conclusiones y otro tipo de información relacionada con este mensaje que no sean relativas a la actividad propia de RETEVISIÓN MÓVIL S.A. (AMENA), deberán ser entendidas
exclusivas del emisor.
-------
The MPLS-OPS Mailing List
Subscribe/Unsubscribe: http://www.mplsrc.com/mplsops.shtml
Archive: http://www.mplsrc.com/mpls-ops_archive.shtml
|
|