The MPLS-OPS Archive

Cell Relay Retreat>MPLS-OPS Archive>month:2004-Feb> msg00008



[Date Prev][Date Next][Thread Prev][Thread Next]  
  [Date Index][Thread Index][Author Index][Subject Index]

Re: Regarding configuration of MPLS

  • From: Roger Clark Williams <rogerw@nordlink.com>
  • Date: Thu, 05 Feb 2004 23:35:05 -0500
  • Resent-Date: Fri, 6 Feb 2004 00:04:02 -0500
  • To: Yugandhar K <yugandhark@mtech.idrbt.ac.in>, mplsrc <mpls-ops@mplsrc.com>
  • X-Sender: rogerw@nordlink.com@pop.blzservices.com
  • X-SpamCatcher-Score: 10 [X]

Yugandhar, the ip cef distributed command only works on some platforms that allow cef to run as multiple independent services on individual modules. These tensd to be the 7500 level and up. What you may want is simply ip cef. This would be a global command and work for the whole platform.

Also the way you have the second command reported may be an issue. Tag switching might want to run on the interface itself, so I would expect to see:
config-if# tag-switching ip

I don't have books or a router with me right now to make sure that is all correct, but see if it works for you. If I am not correct, I am sure someone else will speak up.

Roger Williams

At 09:20 AM 2/6/2004, Yugandhar K wrote:
Hi all,
 
I would like to know whether Cisco IOS Software Release 12.3(1a) support MPLS or not. I have a 3745 router with above software version. I tried the commanda like:
 
(Config)#ip cef distributed
(config)#tag-switching ip
 
But it is giving unrecognized command. I searched in help also, it is not available. I have gone through many sites, but I didn't get accurate information. If anybody tried on this router with same software version can guide me please.
 
Thanking you sir
 
 
Regards
Yugandhar K
------- The MPLS-OPS Mailing List Subscribe/Unsubscribe: http://www.mplsrc.com/mplsops.shtml Archive: http://www.mplsrc.com/mpls-ops_archive.shtml