The MPLS-OPS Archive

Cell Relay Retreat>MPLS-OPS Archive>month:2004-Feb> msg00054



[Date Prev][Date Next][Thread Prev][Thread Next]  
  [Date Index][Thread Index][Author Index][Subject Index]

Re: Problem in the Router

  • From: ask4mpls <ask4mpls@yahoo.com>
  • Date: Wed, 25 Feb 2004 07:56:28 -0800 (PST)
  • Resent-Date: Wed, 25 Feb 2004 11:29:23 -0500
  • To: reddy <koduru_reddy@yahoo.co.in>, mpls-ops@mplsrc.com

Hi ,
 
Try to fixup I/O memory. As well as just observed that router is not reloaded full , it takes around 65-70 seconds to come in the normal condition.That could be just setting of PCounter to null zero.Which is forced the router s/w to reset.And before happening this situation, router CPU load goes to 95-100%.You can see it , if you capture CPU load also.
 
Try to reinstall the same IOS once again. And observe it.
 
Thanks & Regards
Abhishek Mittal


reddy <koduru_reddy@yahoo.co.in> wrote:
Hi all,
 
In my routers from the couple of days I am facing some problem..two of 3600 series routers gets rebooted automatically..after that in the show version i am getting the following error.
 
" System returned to ROM by bus error at PC 0x0, address 0x0 "

the feedback of the  tech-support output from cisco is

TRY THIS: Try reseating the hardware for location 'elements', before replacing  it.

but  one export has suggested to increase the I/O mem .

Can u please suggest me how to fix the problem.

rgds,

Reddy.

 

 


Yahoo! India Insurance Special: Be informed on the best policies, services, tools and more.

Do you Yahoo!?
Yahoo! Mail SpamGuard - Read only the mail you want.