The MPLS-OPS Archive[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index][Thread Index][Author Index][Subject Index] Re: TDM (E1/T1) over MPLS.
Dear John 1. I assume that these E1 TDM Voice Channels would be digitized[hopefully G.729] through some MUX at both ends, which support Frame-Relay WAN Connectivity at Trunk Side. 2. If 1, is true & you have Cisco H/w, you/Service Provider may deploy ATOM[Any Transport over MPLS; using Martini Draft] and create Transparent L2VPN to transport such digitized & Frame-Relay encapsulated Voice from one location to other over ATOM/MPLS cloud. I understand even Juniper deploys such L2 VPN, using "Kompala Draft" Shailendra ----- Original Message ----- From: "John Senior" <js@irishbroadband.ie> To: <mpls-ops@mplsrc.com> Sent: Wednesday, January 28, 2004 4:10 PM Subject: [MPLS-OPS]: TDM (E1/T1) over MPLS. > Hi folks, > > I am currently investigating implementing MPLS on our network, most > likely with Juniper. One area that I need to cover is the ability to > carry E1 TDM (i.e. 30 channels of voice) circuits. I realise that > there are products out there like these: www.tdmoip.com from RAD that > can 'packetize' voice circuits, but am wondering what the state of > play is with carrying TDM directly? Juniper can't do this today, but > I'm told that it is being investigated. Are there any other vendors > who can do this? > > All the best, > > John. > > -- > John Senior <js@irishbroadband.ie> > > ------- > The MPLS-OPS Mailing List > Subscribe/Unsubscribe: http://www.mplsrc.com/mplsops.shtml > Archive: http://www.mplsrc.com/mpls-ops_archive.shtml > > > ------- The MPLS-OPS Mailing List Subscribe/Unsubscribe: http://www.mplsrc.com/mplsops.shtml Archive: http://www.mplsrc.com/mpls-ops_archive.shtml
|
|