The MPLS-OPS Archive

Cell Relay Retreat>MPLS-OPS Archive>month:2004-Mar> msg00115



[Date Prev][Date Next][Thread Prev][Thread Next]  
  [Date Index][Thread Index][Author Index][Subject Index]

RE: BGP Tweaking query

  • From: "M. ELK" <elkou141061@hotmail.com>
  • Date: Wed, 24 Mar 2004 11:22:32 +0000
  • Resent-Date: Wed, 24 Mar 2004 06:48:54 -0500
  • To: r.amos@zahav.net.il, Devendra.Vyas@relianceinfo.com, mpls-ops@mplsrc.com
  • X-OriginalArrivalTime: 24 Mar 2004 11:22:33.0288 (UTC) FILETIME=[4D4B1480:01C41192]
  • X-Originating-Email: [elkou141061@hotmail.com]
  • X-Originating-IP: [57.250.229.136]
  • X-Sender: elkou141061@hotmail.com


Hi Amos

Not clear how TE alone will help here .
My guess that the only solution is the  "ugly" policy based routing along 
with TE .
A special case  :
if such pool are connected to a specific PE ,ie: say PE1 where no other pool 
are
also connected to PE1 .
Over PE1 , we could do any BGP trick to prefer BGP route comming from ASBR1 
over ASBR2 .
Run A TE tunnel from PE1 to ASBR1 (this to prevent any node along the path 
within the AS diverting the traffic to ASBR2 if such node selected ASBR2 as 
the best path for such destination ) .
ASBR1 should advertise this POOL with lower MID than ASBR2 (if the same 
provider) or
ASBR2 prepend AS NBR (if differen provider )  to ensure that the return path 
is also via ASBR1.

Pls comment.

Brgds




>From: "Amos Rosenboim" <r.amos@zahav.net.il>
>To: <Devendra.Vyas@relianceinfo.com>, <mpls-ops@mplsrc.com>
>Subject: RE: [MPLS-OPS]: BGP Tweaking query
>Date: Wed, 24 Mar 2004 12:40:28 +0200
>
>Hi,
>
>One of the limitations that ip routing presents is that it's done (at
>its "natural" way only by looking at the destination ip.
>An "ugly" solution for your request would be to use policy based routing
>- this kind of solution has many limitations.
>A more "elegant" solution is to use mpls traffic engineering to get the
>results you need.
>
>Regards
>Amos
>
>
>
>-----Original Message-----
>From: Devendra.Vyas@relianceinfo.com
>[mailto:Devendra.Vyas@relianceinfo.com]
>Sent: Wednesday, March 24, 2004 12:13 PM
>To: mpls-ops@mplsrc.com
>Subject: [MPLS-OPS]: BGP Tweaking query
>
>
>
>
>
>
>if general routing questions are outside the domain of this list..excuse
>me.
>
>
>anyway-
>
>if i have some prefixes that i announce and i am multihomed -          i
>want a particular pool to always exit (outgoing) to the internet via a
>particular link.
>
>how can i tweak bgp (wrt juniper)for solving this.or will BGP will take
>the
>best path on its own everytime.
>
>
>Thanks & Regards,
>
>Devendra Vyas
>
>
>
>-------
>The MPLS-OPS Mailing List
>Subscribe/Unsubscribe:  http://www.mplsrc.com/mplsops.shtml
>Archive: http://www.mplsrc.com/mpls-ops_archive.shtml
>
>-------
>The MPLS-OPS Mailing List
>Subscribe/Unsubscribe:  http://www.mplsrc.com/mplsops.shtml
>Archive: http://www.mplsrc.com/mpls-ops_archive.shtml

_________________________________________________________________
Tired of spam? Get advanced junk mail protection with MSN 8. 
http://join.msn.com/?page=features/junkmail

-------
The MPLS-OPS Mailing List
Subscribe/Unsubscribe:  http://www.mplsrc.com/mplsops.shtml
Archive: http://www.mplsrc.com/mpls-ops_archive.shtml