Hi ,
I am new to MPLS techonology.....I am unable to
ping the CE router from PE router .When i try to ping the CE i am getting
Intermittently drops....
CHNACR02#ping vrf ML_CHE x.x.x.x
Type escape sequence to abort.
Sending 5,
100-byte ICMP Echos to x.x.x.x, timeout is 2 seconds:
...!!
Success rate
is 40 percent (2/5), round-trip min/avg/max = 1504/1642/1780
ms
CHNACR02#ping vrf ML_CHE 203.124.216.98
Type escape sequence to abort.
Sending 5,
100-byte ICMP Echos to x.x.x.x, timeout is 2 seconds:
!!!!!
Success rate
is 100 percent (5/5), round-trip min/avg/max = 1108/1664/1936
ms
CHNACR02#ping vrf ML_CHE 203.124.216.98
Type escape sequence to abort.
Sending 5,
100-byte ICMP Echos to x.x.x.x, timeout is 2 seconds:
..!!!
Success rate
is 60 percent (3/5), round-trip min/avg/max = 1692/1758/1868
ms
CHNACR02#sh ip route vrf ML_CHE
Codes: C -
connected, S - static, I - IGRP, R - RIP, M - mobile, B -
BGP
D - EIGRP, EX - EIGRP external, O
- OSPF, IA - OSPF inter area
N1 - OSPF
NSSA external type 1, N2 - OSPF NSSA external type
2
E1 - OSPF external type 1, E2 - OSPF
external type 2, E - EGP
i - IS-IS, su
- IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS
level-2
ia - IS-IS inter area, * -
candidate default, U - per-user static
route
o - ODR, P - periodic downloaded
static route
Gateway of last resort is not set
x.x.x..0/30 is
subnetted, 1 subnets
C x.x.x.x is
directly connected, Serial3/1:11
CE -PE are configured through static
routes....
Appreciate ur comments
regards
Prabhu