The MPLS-OPS Archive

Cell Relay Retreat>MPLS-OPS Archive>month:2004-Oct> msg00084



[Date Prev][Date Next][Thread Prev][Thread Next]  
  [Date Index][Thread Index][Author Index][Subject Index]

Re: Combining MPLS- and non-MPLS-Traffic

  • From: Garry Glendown <garry@regio.net>
  • Date: Tue, 26 Oct 2004 14:28:40 +0200
  • CC: Amos Rosenboim <r.amos@zahav.net.il>, mpls-ops@mplsrc.com
  • Resent-Date: Tue, 26 Oct 2004 08:54:59 -0400
  • User-Agent: Mozilla Thunderbird 0.8 (Windows/20040913)
  • X-Enigmail-Supports: pgp-inline, pgp-mime
  • X-Enigmail-Version: 0.86.1.0

>> The other option is to use a feature called source address based vrf
>> selection.
> FR encap is not really the option, but the address based vrf selection 
> seems to be exactly what I am looking for ... found a nice page on 
> cisco.com that should solve this!

Anyway, contrary to what the page says about which IOS versions include 
this feature (e.g. 12.2(25)), Cisco's Feature Navigator only shows some 
very limited versions that include the address based vrf routing 
(12.2(20)) ... is anybody using this feature, or could check with an 
otherwise MPLS enabled version (like 12.3(9)) if these commands are 
supported:

Router(config)# vrf selection source 10.1.0.0 255.255.0.0 vrf vpn1
Router(config)# interface SOMEINT
Router(config-if)# ip vrf select source

Tnx, -garry

-------
The MPLS-OPS Mailing List
Subscribe/Unsubscribe:  http://www.mplsrc.com/mplsops.shtml
Archive: http://www.mplsrc.com/mpls-ops_archive.shtml