The MPLS-OPS Archive

Cell Relay Retreat>MPLS-OPS Archive>month:2004-Sep> msg00169



[Date Prev][Date Next][Thread Prev][Thread Next]  
  [Date Index][Thread Index][Author Index][Subject Index]

RE: OSPF PE to CE Connectivity

  • From: Alcayaga Chavez Marcos Manuel <malcayaga@entel.cl>
  • Date: Mon, 27 Sep 2004 10:36:54 -0400
  • Cc: mpls-ops@mplsrc.com
  • Resent-Date: Mon, 27 Sep 2004 11:03:52 -0400

Nop, becouse in a Stub area you can't have redistribution (between MP-BGP &
OSPF).

So, the workarround is configure NSSA in the PE side.

regards
Marcos

-----Mensaje original-----
De: Quinton Coelho [mailto:quintonc@webmail.co.za]
Enviado el: Lunes, 27 de Septiembre de 2004 10:27
Para: mpls-ops@mplsrc.com
Asunto: [MPLS-OPS]: OSPF PE to CE Connectivity


Hi,

Is there anyone that knows if it is possible to configure a
CE connected to PE as a STUB node on the PE router - Cisco
Router-?

EG:

!
router ospf 1 vrf VPNONE
network 10.1.1.0 0.0.0.3 area 0.0.0.200
area 0.0.0.200 stub
!

Thanks
Quinton

_____________________________________________________________________
For super low premiums ,click here http://www.dialdirect.co.za/quote

-------
The MPLS-OPS Mailing List
Subscribe/Unsubscribe:  http://www.mplsrc.com/mplsops.shtml
Archive: http://www.mplsrc.com/mpls-ops_archive.shtml

-------
The MPLS-OPS Mailing List
Subscribe/Unsubscribe:  http://www.mplsrc.com/mplsops.shtml
Archive: http://www.mplsrc.com/mpls-ops_archive.shtml