The MPLS-OPS Archive[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index][Thread Index][Author Index][Subject Index] LSP switchover for the maintainance reason
Hi All, I am plannning to deploy rsvp-te based MPLS network with Cisco7600. And there are some requirements for the network. 1) Primary path and secondary path for an lsp are configured explicitly. 2) Primary path is used normally. But when the maintainance is required, the path is manually changed to secondary. Then it must be changed without packet loss. 3) The path must not be back to primary automatically. For achieving the above requirements, I wonder that I should configure two tunnels for one destination and change administrative-weight of each of them. But if this configuration is used, rsvp-information will not reflect the real bandwidth design compared to when using path-option in the tunnel configuration. Is there any reasonable way to meet these requirements? Would you tell me how it should be configured? Thanks in advance, -Totti Murakami ------- The MPLS-OPS Mailing List Subscribe/Unsubscribe: http://www.mplsrc.com/mplsops.shtml Archive: http://www.mplsrc.com/mpls-ops_archive.shtml MPLScon 2005 - May 16-19, NYC, NY http://www.mplscon.com/
|
|