The MPLS-OPS Archive

Cell Relay Retreat>MPLS-OPS Archive>month:2005-Mar> msg00030



[Date Prev][Date Next][Thread Prev][Thread Next]  
  [Date Index][Thread Index][Author Index][Subject Index]

RE: Layer 2 VPN Over MPLS Configuration

  • From: "Bob Arthurs" <bob_arthurs@hotmail.com>
  • Date: Wed, 30 Mar 2005 19:16:27 +0000
  • Cc: mpls-ops@mplsrc.com
  • Resent-Date: Wed, 30 Mar 2005 14:43:53 -0500
  • X-OriginalArrivalTime: 30 Mar 2005 19:16:27.0544 (UTC) FILETIME=[F8AF7980:01C5355C]
  • X-Originating-Email: [bob_arthurs@hotmail.com]
  • X-Originating-IP: [65.54.161.200]
  • X-Scanned-By: MIMEDefang 2.45


>
>You will need to configure BGP in the core as well, running between the 
>PEs.
>It is BGP that distributes the VPN labels, not LDP.
>


no- this is draft martini/AToM. The traffic is transported between PEs using 
the tunnel LSP, which can be LDP or RSVP-TE signalled, and the pseudowire 
traffic is then switched to the correct attachment circuit using the VC (PW) 
label. The VC label is signalled between PEs using LDP (not BGP).

Some links-

http://www.cisco.com/en/US/products/sw/iosswrel/ps1829/products_feature_guide09186a0080223a1b.html

And-

http://www.ciscopress.com/title/1587051044


rgds.






>
>-----Original Message-----
>From: mohd irwan [mailto:mplsvpn2004@yahoo.com]
>Sent: Wednesday, March 30, 2005 1:39 AM
>To: mpls-ops@mplsrc.com
>Subject: [MPLS-OPS]: Layer 2 VPN Over MPLS Configuration
>
>Good Day
>
>I'm Irwan, Student from Kuala Lumpur, Malaysia. I would like to know sample
>configuration for Layer 2 VPN over MPLS(Martini Draft) running on Cisco 
>7200
>with IOS 12.3
>
>I would like to know the specific task and requirement for me to setup.
>
>The Scenario :
>
>2 PC , 4 Cisco 7200 VXR
>
>The PC will be the two site of CE's and 2 7200 will be the PE Router and 2
>will be the P Router
>
>
>I have configured :
>
>- IP Address for each PE and P interface
>- IGP ( OSPF)
>- MPLS, LDP
>-ATOM( Layer 2 Transport Configuration)
>   -> Configured Ethernet over MPLS
>
>Is there anything that i forgot to configure ?
>
>If in Layer 3 VPN we configure VFR, what about the Layer 2 VPN over MPLS
>(Martini) .
>
>What should I configure between the PC's(CE) and PE Router.
>
>Thanks for the help .
>
>
>Regards
>
>Mohd Irwan
>Bsc(Hons) Degree in Networking and Data Communication Mara University
>Malaysia
>
>
>
>
>__________________________________
>Do you Yahoo!?
>Yahoo! Small Business - Try our new resources site!
>http://smallbusiness.yahoo.com/resources/
>
>-------
>The MPLS-OPS Mailing List
>Subscribe/Unsubscribe:  http://www.mplsrc.com/mplsops.shtml
>Archive: http://www.mplsrc.com/mpls-ops_archive.shtml
>
>MPLScon 2005 - May 16-19, NYC, NY
>http://www.mplscon.com/
>
>-------
>The MPLS-OPS Mailing List
>Subscribe/Unsubscribe:  http://www.mplsrc.com/mplsops.shtml
>Archive: http://www.mplsrc.com/mpls-ops_archive.shtml
>
>MPLScon 2005 - May 16-19, NYC, NY
>http://www.mplscon.com/


-------
The MPLS-OPS Mailing List
Subscribe/Unsubscribe:  http://www.mplsrc.com/mplsops.shtml
Archive: http://www.mplsrc.com/mpls-ops_archive.shtml

MPLScon 2005 - May 16-19, NYC, NY
http://www.mplscon.com/