The MPLS-OPS Archive

Cell Relay Retreat>MPLS-OPS Archive>month:2005-May> msg00003



[Date Prev][Date Next][Thread Prev][Thread Next]  
  [Date Index][Thread Index][Author Index][Subject Index]

RE: Configure Ethernet over MPLS with Different Customers using the s ame VLAN

  • From: Gary Rose <grose@wams.com>
  • Date: Mon, 9 May 2005 14:43:52 -0700
  • Resent-Date: Mon, 9 May 2005 18:21:50 -0400
  • X-Scanned-By: MIMEDefang 2.45

One more clarification, the access ports need to be 802.1q trunk ports.

 

Thanks again.

 

-Gary

From: Gary Rose [mailto:grose@wams.com]
Sent: Monday, May 09, 2005 4:00 PM
To: mpls-ops@mplsrc.com
Subject: [MPLS-OPS]: Configure Ethernet over MPLS with Different Customers using the s ame VLAN

 

Hello Folks,

 

We are implementing a Metro Ethernet network using Cisco 6500 series MPLS switches with the core connected with 10GigE cards. This is a service provider network configured for EoMPLS (Martini Draft) and will have some customers using the same access VLANs.

With a Layer 2 access configuration, what is the best configuration to accomplish this? QinQ? We have no problem using unique VLANs on the PE side but need to ensure that customer access VLANs can overlap each other on the same PE switch.

Any input is much appreciated.

 

Thanks.

 

-Gary